Abstract:Via the process of photografting surface modification by UV light,fluorenone (FL) was employed as an initiator in the grafting reaction of acrylic acid (AA), acryamide (AM), methylacrylic acid (MAA), methyl acrylate (MA) and methyl methacrylate (MMA) onto the surface of LDPE films for introducing new chemical properties to the film surface. In this study, influences of the initiator concentration, UV light irradiation time, UV light irradiation intensity as well as the types of functional monomers on the grafting yield of LDPE films were investigated respectively. Within a certain range, the results showed that raising the fluorenone concentration would lead to the increasing of the grafting yield, however, when the fluorenone concentration reached 5%, the grafting yield decreased. The grafting polymerization was fully promoted by increasing the light irradiation intensity up to 100 W/m(2) and prolonging the UV light irradiation time to 4 min. Grafting ability of different types of monomers on LDPE films was concerned with parameters such as activity of monomers, compatibility of monomers with the matrix and so on. After successful grafting of functional monomers, the changes of water contact angle of the grafted LDPE film were related to the grafting yield of monomer on the film as well as the hydrophilicity of the applied monomers.

Research on Linen Fabric Grafted with Acrylamide Via Plasma Initiation

Effect of Plasma Pretreatment on Flame Retardant Modification of Ramie Fabric Via Layer-by-layer Assembly

Surface modification of PVDF porous membranes by electron irradiation

STUDY ON PRE-IRRADIATION GRAFTING OF NIPAAm ONTO COTTON CELLULOSE FABRIC

Study on polyester fabric grafted with acrylic acid initiated by ultraviolet light

Development of Universal Fabric Dyeing and Adhesion Through RF Glow Discharge Plasma Treatment

Grafting Polymerization of Acrylic Acid Onto Preirradiated Polypropylene Fabric

Surface grafting modification of carbon fibers by γ-ray pre-irradiation and plasma technique

Low Temperature Plasma Initiated Grafting Modification on PET Fabrics

Pre-irradiation Grafting of Temperature Sensitive Hydrogel on Cotton Cellulose Fabric

Grafting of silk with electron beam irradiation

SURFACE PHOTOGRAFTING OF FUNCTIONAL MONOMERS INITIATED BY FLUORENONE ON LDPE FILMS

Advances in Dyeing Technologies for Polyacrylnitrile

Modifying terylene/cotton blend fabric with P(AMPS/NIPA) intelligent hydrogel by graft polymerization initiated with MLTP

Grafting copolymerization of N-isopropylacryamide onto preirradiated polypropylene fabric and Fe (II) adsorption

Grafting of Acrylamide to Loomstate Cotton Fabric Using Potassium Permanganate-Thiourea Redox System

Gamma radiation-assisted functionalization of flax fibers for diversified applications

Antimicrobial Finishing of Cotton Fabric with N-MA Based on Plasma-Induced Grafting

Two-step surface grafting of acrylic acid on low density polyethylene(LDPE) film initiated by fluorenone

Radiation grafting/crosslinking of silk using electron-beam irradiation

Study on the Graft Reaction of Poly(propylene) Fiber with Acrylic Acid