Abstract:One kind of fluorinated acrylate monomer, R5610, was grafted onto the surface of LDPE films by UV-induced photograft polymerization. The existence of a fluorinated polymer layer and its linkage with the LDPE substrate through chemical bonds were confirmed by FTIR, ESCA, SEM and DSC measurements on the butanone-extracted grafted films. It's found that a moderate increase of the UV intensity, concentration of both photoinitiator and monomer, and reaction temperature favored the improvement of grafting yield. The overall activation energy for the photograft polymerization reaction of R-5610 on LDPE was calculated to be 54.2 kJ/mol. The surface contact angles of the grafted films were found to increase with the improvement of grafting yield before they became constant, which implied that there could be a boundary layer that influenced the interaction between the LDPE substrate and the probe water drops during the measurement of contact angles. The LDPE substrate interacted with the probe water drop through the boundary when grafting yield of the grafted film was low and the grafted polymer layer was thinner than the critical boundary thickness, which resulted in the similarity between contact angles of LDPE and grafted film. As grafting yield increased, the grafted polymer layer became thicker and the interaction between LDPE substrate and probe water drop was weakened, so the influence of fluorinated polymer on the contact angle became more remarkable and caused the increase of contact angle. When grafting yield went further higher and the thickness of grafted polymer layer exceeded the critical boundary thickness, the interaction between LDPE substrate and probe water drops disappeared, and the contact angle became stabilized thereafter as a result of fluorinated polymer becoming the only one to influence contact angle of grafted films.

Two-step surface grafting of acrylic acid on low density polyethylene(LDPE) film initiated by fluorenone

SURFACE PHOTOGRAFTING OF FUNCTIONAL MONOMERS INITIATED BY FLUORENONE ON LDPE FILMS

Fluorinated acrylate-grafted LDPE films from UV-induced photograft polymerization

A Facile Method for Grafting Polymerisation of Acrylonitrile onto LDPE Film with High Grafting Efficiency

Improvement of Antifogging of Low Density Polyethylene Film by Photografting Acrylic Acid

Surface Grafting of Resorcinol Onto Polyethylene Film

PHOTOGRAFTING OF HSS ON THE SURFACE OF LDPE FILM BY TWO STEPS

Surface Grafting of Phenolic Resole Onto Ldpe Films

Surface Modification of Low-Density Polyethylene Films Via Photografting Polymerization Technique

Ar Plasma-induced Graft Polymerization of Acrylic Acid Onto PTFE Films

Surface Grafting Polymerization of Acrylonitrile Onto Polypropylene Film

Surface Modification of Poly(tetrafluoroethylene) Films Via Plasma Treatment and Graft Copolymerization of Acrylic Acid

Photografting of Acrylic Acid on High Density Polyethylene Powder in Vapour Phase

Surface Photografting Polymerization of Methyl Methacrylate in N,N-Dimethylformamide on Low Density Polyethylene Film

STUDIES ON PHOTOGRAFTING OF TRIMETHYLOL PROPANE TRIACRYLATE ONTO THE SURFACE OF LDPE FILMS

Surface Photografting Polymerization Of Trimethylolpropane Triacrylate Onto Ldpe Substrate In Tetrahydrofuran/Water Mixtures

Grafting Polymerization of Acrylonitrile onto LDPE Film: Study on Grafting Chain Length and Density with UV-vis Spectroscopy

The Study of Melt Grafting Mechanism of Acrylic Acid and Butyl Acrylate Onto Low Density Polyethylene and Its Application As Internal Plasticizer

Study on the Graft Reaction of Poly(propylene) Fiber with Acrylic Acid

Preparation and Characterization of PEs Grafted with Acrylic-based Monomers