Abstract:Single-phase-to-ground faults are the most frequent faults likely to occur in power distribution networks. As for a neutral un-effectively grounded system (NUGS), the low fault current is very common in the case of occurrence of a single-phase earth fault, leading to hard identification of the faulty feeder. In conventional way, this target can be possibly achieved by the comparison of the polarities, magnitudes, or the phase angles of the zero-sequence currents of all feeders connected to the same busbar. However, it becomes a difficult task to implement this functionality into the protection of feeder. In this paper, a novel single-phase-to-ground fault protection for NUGS is put forward. Different from conventional centralized-comparison protection, this protection can detect single-phase-to-ground fault on the feeder individually, and can be realized on FTU (Feeder Terminal Unit). It is based on the measurement of the zero-sequence voltage and zero-sequence current. The tripping strategy follows the characteristic of the modified inverse-time delay curve. By means of analyzing the characteristics of the zero-sequence transient currents, it is disclosed that the magnitude of the zero-sequence current of the faulty feeder should be greater than that of any sound feeder. Then a composite compensated voltage is formed based on the zero-sequence voltage and zero-sequence current to evaluate a revising factor for every feeder respectively. Using this revising factor to modify the identical standard inverse-time delay curve adopted by all the feeder zero-sequence overvoltage protections, the tripping time of the zero-sequence overvoltage protections of all feeders will differ from each other. In this case, the selectivity of the protection can be guaranteed. This proposed algorithm is validated with the EMTP simulation tests.

A novel detector of ground fault and ferro_resonance in ungrounded distribution system

Single-phase-to-ground Fault Detection with Distributed Parameters Analysis in Non-Direct Grounded Systems

Grounding Failure Detection Based on Wavelets Method in Resonant Grounded Power Distribution System

A Novel Selective Earth Fault Detection Method Using Residual Current

Faulty Feeder Detection Under High Impedance Faults for Resonant Grounding Distribution Systems

Faulty Feeder Detection for Single-Phase-to-Ground Fault in Distribution Networks Based on Transient Energy and Cosine Similarity

Single Phase Ferroresonance Detection and Type Recognition in Solidly Grounded Power Grid

A new principle to detect the grounded line in a neutral point indirectly grounded power system based on the energy function

PROTECTION FOR DETECTING SINGLE-PHASE-TO-GROUND FAULT FEEDER BASED ON SYNTHESIS INCREMENT PRINCIPLE IN RESONANT GROUNDED POWER DISTRIBUTION SYSTEM WITH ARC-SUPPRESSION WITH MAGNETIC BIAS

Faulty Feeder Detection Method Based on VMD–FFT and Pearson Correlation Coefficient of Non-Power Frequency Component in Resonant Grounded Systems

High-Resistance Grounding Fault Detection and Line Selection in Resonant Grounding Distribution Network

Shunt Petersen-Coil with Resistor for Single Phase Fault Detection in Resonant Grounded Power Distribution Systems

Faulty Feeder Identification Based on Data Analysis and Similarity Comparison for Flexible Grounding System in Electric Distribution Networks

A novel fault locator for power distribution system with neutral non-effectively grounded

Arc High Impedance Grounding Fault Detection for Resonant Grounding Distribution System Based on Directed Area in Characteristic Frequency Band

Fault Location Method in Resonant Grounded Networks Based on Distributed Modulation and Compensation Adjustment

A selective single-phase-to-ground fault protection for neutral un-effectively grounded systems

Single-phase fault detection based on the wavelet packet analysis of zero-sequence power components in the Petersen-coil grounded system

A New Approach for Single-Phase-to-Ground Fault Detection in Mid-Voltage Systems Using Low-Voltage Sensors

A Ground Fault Section Location Method Based on Active Detection Approach for Non-Effectively Grounded DC Distribution Networks

Analysis and Detection of High Impedance Grounding Fault in Neutral Point Effectively Grounding Distribution Network