Abstract:In order to cope with the storage wall of the von Neumann computing architecture, the computing in-memory (CIM) architecture embeds logic in the memory, and completes the operation while reading the data, so that the storage unit has computing power and reduces processing data transfer between the device and the memory. In order to realize the design of large-capacity and low-cost memory, this paper proposes a storage system based on 4T SRAM (static random access memory) with double word line and double threshold, which can not only realize data storage and reading, but also realize BCAM (binary content addressable memory) operations and logic operations such as AND, NOR, and XOR. During logic operation, two rows of storage data are selected through the decoding circuit, the bit lines are all pre-discharged to a low level, and the bit line voltage is compared with the reference voltage through the bit line end sensitive amplifier and the operation result is output. During BCAM operation, the external input data are decoded by the decoding circuit to realize the on and off control of the left and right transmission tubes of the storage unit, and the bit line end sensitive amplifier outputs the matching result through the NOR gate. The proposed circuit is built and simulated under 65 nm CMOS technology. Compared with the 6T memory cell, the storage area of the 4T memory cell is reduced by 25%. Compared with the single word line 4T memory structure, the double word line 4T memory structure can save about 47% of the read power consumption in very large scale integration (VLSI) applications. The maximum power consumption of data matching during BCAM operation is 909.72 FJ, and the array operation speed of N columns can reach 16161.6×N MB/Hz when the word line voltage is 600 mV.

An 8T SRAM Array with Configurable Word Lines for In-Memory Computing Operation

In-Memory Computing with Double Word Lines and Three Read Ports for Four Operands.

An 11T SRAM Cell for the Dual-Direction In-Array Logic/CAM Operations

A 9T-SRAM Based Computing-in-memory with Redundant Unit and Digital Operation for Boolean Logic and MAC

Configurable Memory with a Multilevel Shared Structure Enabling In-Memory Computing

Two-Direction In-Memory Computing Based on 10T SRAM With Horizontal and Vertical Decoupled Read Ports

A 10T SRAM with Two Read and Write Modes Across Row and Column for CAM Operation and Computing In-Memory

Computing In-Memory Design Based on Double Word Line and Double Threshold 4T SRAM

A Fully Digital SRAM-Based Four-Layer In-Memory Computing Unit Achieving Multiplication Operations and Results Store

A 28-Nm Compute SRAM with Bit-Serial Logic/Arithmetic Operations for Programmable In-Memory Vector Computing

Configurable in-memory computing architecture based on dual-port SRAM

TAC-RAM: A 65nm 4kb SRAM Computing-in-Memory Design with 57.55 TOPS/W Supporting Multibit Matrix-Vector Multiplication for Binarized Neural Network.

A 9T-SRAM In-Memory Computing Macro for Boolean Logic and Multiply-and-accumulate Operations

In Situ Storing 8T SRAM-CIM Macro for Full-Array Boolean Logic and Copy Operations

A 6T-3M SOT-MRAM for In-Memory Computing with Reconfigurable Arithmetic Operations.

Multifunctional Computing-in-memory SRAM Cells Based on Two-Surface-channel MoS2 Transistors

14.2 A Compute SRAM with Bit-Serial Integer/Floating-Point Operations for Programmable In-Memory Vector Acceleration

Reconfigurable Bit-Serial Operation Using Toggle SOT-MRAM for High-Performance Computing in Memory Architecture

A 28-Nm 9t Sram-Based Cim Macro with Capacitance Weighting Module and Redundant Array-Assisted Adc

C 2 IM: A Compact Computing-In-Memory Unit of 10 Transistors with Standard 6T SRAM

RRAM-Based Single Device for Vector Multiplication and Multibit Storage with Ultrahigh Area Efficiency