Abstract:In this study, ultra-fine grain Mg-3Zn-xCa-0.6Zr (x = 0, 0.6, 1.2, 1.8) alloy was obtained by a novel extrusion-shearing (ES) deformation process combining initial forward extrusion and subsequent equal channel angular extrusion (ECAP) shearing. The purpose of this paper is to improve the strength and plasticity of the alloy by ES process. The results of as-cast and homogenized alloy show that the ternary Ca2Mg6Zn3 phase with excellent thermal stability and refined grain size was formed in the alloy by adding Ca. In the ES process, the ternary phase was broken into ultra-fine particles pinned to the dynamic recrystallization (DRX) grain boundary, which introduced strong particle stimulated nucleation (PSN). Moreover, large number of MgZn phases in Ca-containing alloys were dynamically precipitated at DRX grain boundaries and within grains. In addition, in the early stage of the ES process, Ca2Mg6Zn3 phase promoted the accumulation of dislocations at the grain boundaries, and part of the grain boundary was transformed into low-angle grain boundaries (LAGBs) and high-angle grain boundaries (HAGBs). After the die corner shearing, the accumulated LAGBs gradually transformed into HAGBs due to continuous dynamic recrystallization (CDRX). Through the novel ES process and the addition of Ca element, the basal plane texture was significantly weakened and the DRX grain was refined. With the increase in Ca content, the strength and toughness of ES alloy increased obviously, and the yield asymmetry decreased gradually. When the content of Ca was 1.2 wt%, ES alloy exhibited the best combination of strength and toughness (UTS = 342 MPa, δ = 20.9%) due to nano-scale Ca2Mg6Zn3 phase, grain refinement and texture weakening. This property is of great significance for the development of magnesium alloys for biological applications.

Balancing the Strength and Ductility of Mg-6Zn-0.2Ca Alloy Via Sub-Rapid Solidification Combined with Hard-Plate Rolling

Development of low-alloyed Mg–Zn–Ca–Sn–Mn alloy with high strength-ductility synergy by sub-rapid solidification and hot rolling

A high-performance Mg-Al-Sn-Zn-Bi alloy fabricated by combining sub-rapid solidification and hot rolling

Microstructure and mechanical properties of Al-Mg-Si alloy fabricated by a short process based on sub-rapid solidification

Achieving ultrahigh strength in binary Al-10Mg alloy through heavy cryogenic rolling

A rolled Mg−8Al−0.5Zn−0.8Ce alloy with high strength-ductility synergy via engineering high-density low angle boundaries

Dynamic recrystallization, texture and mechanical properties of high Mg content Al–Mg alloy deformed by high strain rate rolling

Effect of Ca addition on microstructure and mechanical properties of Mg–3.8Al–1.1Sn alloys

Effect of Dual Deformation Processes on the Microstructure and Mechanical Properties of Low-Alloyed Mg-Zn-Ca-Mn Alloy

A Rolled Mg‐8Al‐1Sm‐1Zn Alloy with High Strength‐Ductility via Single‐Pass Liner Rolling

Enhanced strength-ductility synergy and activation of non-basal slip in as-extruded Mg–Zn–Ca alloy via heterostructure

Microstructure and mechanical properties of Mg-Zn-Ca-Zr alloy fabricated by hot extrusion-shearing process

Novel Mg-Al-Sn-Ca with enhanced mechanical properties and high corrosion rate via sub-rapid solidification for degradable magnesium alloy

Non-basal Slips Mediated Dynamic Recrystallization Promote Synergistic Strengthening and Toughening of Centrifugal Casting Mg–1.1Mn–0.5Al Alloy via High Strain Rolling

Microstructure and mechanical properties synergistically enhanced via heat treatment modification of the as-extruded Mg-1.5Al-0.5Zn-0.2Y-0.2Ca alloy

Enhancing Strength-Ductility Synergy and Corrosion Residual Strength of Hot-Rolled Mg-2Zn-0.85Y Alloy

High performance Mg-8Gd-4Y-1Zn-0.5Al alloy with long-period stacking ordered structure by hot rolling

Enhanced ductility of Mg–1Zn–0.2Zr alloy with dilute Ca addition achieved by activation of non-basal slip and twinning

Rapid dislocation-mediated solute repartitioning towards strain-aging hardening in a fine-grained dilute magnesium alloy

Tailoring strength and ductility of Mg97Y2Zn1 alloy through the architecture of heterogeneous lamellar structure by large-ratio hot extrusion

Microstructure modification and precipitation strengthening for Mg–6Zn–1Mn–4Sn–0.5Ca through extrusion and aging treatment