Abstract:The thermoelectric performance of the p‐type Mg3Sb2‐based compound is improved by fully optimizing its carrier concentration, mobility, and lattice thermal conductivity. As a result, a unicouple comprised of p‐type Mg1.594Yb0.2Na0.006Zn1.2Sb2 and n‐type Mg3.2SbBi0.99Te0.01 is successfully constructed, and exhibits high conversion efficiency, good stability, and low cost, showing its great potential for low‐grade heat recovery. Bi2Te3‐based devices have long dominated the commercial market for thermoelectric cooling applications, but their narrow operating temperature range and high cost have limited their possible applications for conversion of low‐grade heat into electric power. The recently developed n‐type Mg3Sb2‐based compounds exhibit excellent transport properties across a wide temperature range, have low material costs, and are nontoxic, so it would be possible to substitute the conventional Bi2Te3 module with a reliable and low‐cost all‐Mg3Sb2‐based thermoelectric device if a good p‐type Mg3Sb2 material can be obtained to match its n‐type counterpart. In this study, by comprehensively regulating the carrier concentration, carrier mobility, and lattice thermal conductivity, the thermoelectric performance of p‐type Mg3Sb2 is significantly improved through Na and Yb doping in Mg1.8Zn1.2Sb2. Moreover, p‐ and n‐type Mg3Sb2 are similar in terms of their coefficients of thermal expansion and their good performance stability, thus allowing the construction of a reliable all‐Mg3Sb2‐based unicouple. The decent conversion efficiency (≈5.5% at the hot‐side temperature of 573 K), good performance stability, and low cost of this unicouple effectively promote the practical application of Mg3Sb2‐based thermoelectric generators for low‐grade heat recovery.

Scalable Synthesis of N-Type Mg3Sb2-xBix for Thermoelectric Applications

High-Performance Mg<sub>3</sub>Sb<sub>2-<i>x</i></sub>Bi<i><sub>x</sub></i> Thermoelectrics: Progress and Perspective

Promoted application potential of p-type Mg3Sb1.5Bi0.5 for the matched thermal expansion with its n-type counterpart

Maximizing the performance of n-type Mg3Bi2 based materials for room-temperature power generation and thermoelectric cooling

Na/Bi-co-doping and Heterogeneous Interfaces Leading to Enhanced Thermoelectric Performance of P-Type Mg3Sb2-based Zintls

High-Performance Low-Cost n-Type Se-Doped Mg3Sb2-Based Zintl Compounds for Thermoelectric Application

Optimization of Thermoelectric Property of n‐Type Mg3Sb2 Near Room Temperature via Mn&Se Co‐Doping

High thermoelectric performance and anisotropy studies of n-type Mg3Bi2-based single crystal

High-Performance Mg3Sb2-xBix Thermoelectrics: Progress and Perspective

Interface and Surface Engineering Realized High Efficiency of 13% and Improved Thermal Stability in Mg3Sb1.5Bi0.5‐Based Thermoelectric Generation Devices

High performance of Mg3Bi1.5Sb0.5 based materials for power generation: Revealing the counter-intuitive effect of tuning Bi content on the thermoelectric properties

Inhibiting Mg Diffusion and Evaporation by Forming Mg‐Rich Reservoir at Grain Boundaries Improves the Thermal Stability of N‐Type Mg3Sb2 Thermoelectrics

Boosting room-temperature thermoelectric performance of Mg 3 Sb 1.5 Bi 0.5 material through breaking the contradiction between carrier concentration and carrier mobility

Effect of Composition Adjustment on the Thermoelectric Properties of Mg3Bi2-Based Thermoelectric Materials

Mg3(Bi,Sb)2 single crystals towards high thermoelectric performance

Wide-temperature-range thermoelectric n-type Mg3(Sb,Bi)2 with high average and peak zT values

Improved figure of merit (z) at low temperatures for superior thermoelectric cooling in Mg3(Bi,Sb)2

Enhanced Thermoelectric Performance of p‐Type Mg3Sb2 for Reliable and Low‐Cost all‐Mg3Sb2‐Based Thermoelectric Low‐Grade Heat Recovery

Synergy of grain size and texture effect for high-performance Mg3Sb2-based thermoelectric materials

Compromise between band structure and phonon scattering in efficient n-Mg3Sb2-Bi thermoelectrics

Enhancing the Thermoelectric Performance of n‐Type Mg3Sb2‐Based Materials via Ag Doping