Abstract:R&D of high field accelerator magnets is ongoing at the Institute of High Energy Physics, Chinese Academy of Sciences (IHEP, CAS) for pre-study of the next-generation high energy colliders like Super Proton-Proton Collider (SPPC), Future Circular Collider (FCC) and etc. A 12.47-T main field at 4.2 K has been attained in 2021 within two 14-mm apertures of LPF1-U, a superconducting model dipole magnet with Nb 3 Sn & NbTi combined common-coil configuration. Based on the experiences mastered in the LPF1 series magnets, a 16-T high field dipole magnet named LPF3 has been designed, fabricated and is in the performance test process. LPF3 is also a combined magnet with six racetrack Nb 3 Sn coils outside, expected to provide a 13-T main field within two 50-mm apertures, and with inserted HTS coils to enhance the field up to 16 T or even higher. The 13-T Nb 3 Sn dipole magnet, named LPF3-LTS, incorporates a graded common-coil configuration to enhance superconductor efficiency. The optimization of coil layouts includes varying bending radii (BR) and lengths of straight sections (LSS) to mitigate field accumulation in the outer four coils near the central posts and coil ends, respectively. Several Rutherford cables over 200 meters were fabricated for the coils winding, and with the maximum strands count of 42. The support structure for LPF3-LTS has adopted a shell-based design, with an improved “Bladder & Key” technology. Dedicated hydraulic pistons were investigated and utilized to replace the traditional bladders. The main design characteristics, fabrication process and some preliminary test results of the magnet are presented in this paper.

Multipole Magnets for the HIAF Fragment Separator Using the Canted-Cosine-Theta (CCT) Geometry

Design and Test of a Half-Aperture Canted-Cosine-Theta Multipole Prototype Magnet for the HIAF FRagment Separator

Structure Design and Analysis of Canted-Cosine-Theta (CCT) Superconducting Quadrupole Magnet

Preliminary Design of Superconducting Dipole Coils for HIAF in IMP

Status of Multipole Magnets for Hefei Advanced Light Facility

Superconducting Magnet Development for the HIAF Accelerator Complex

Design and Fabrication of a 13-T Twin-Aperture Superconducting Dipole Magnet with Graded Common-Coil Configuration

Magnetic Design Study of the High-Field Common-Coil Dipole Magnet for High-Energy Accelerators

The first superconducting final focus quadrupole prototype of the FCC-ee study

Fabrication and Test of a 1:4 Scaled HTS Coil for the Defocusing Magnet of 2 GeV FFAG Accelerator

Design and Testing of a Prototype Canted-Cosine-Theta HTS Dipole Magnet Using CORC Cable

Mechanical Design of FECD1 at IHEP: a 12-T Hybrid Common-coil Dipole Magnet

Design of a large-scale superconducting dipole magnet for the CEE spectrometer

Design and Optimization of Combined-Function Quadrupole-Sextupole Magnets

The Fast-Pulsed Superconducting Dipole Prototype Magnet of HIAF at IMP

Magnets for HIRFL-CSR Rings

Structural analysis of superconducting dipole prototype for HIAF

Conceptual Mechanical Structure Analysis of A 16 T Canted Cosine Theta (CCT) Magnet

Design of the Magnets of the HALS Project

Design and testing of a demonstration HTS diploe magnet

Permanent-magnet Quadrupoles for an Interdigital H-mode Drift Tube Linear Accelerator: Optimization Code and Adjustable Magnet Design