Abstract:AZ91D, as one of the most widely used casting magnesium alloys, still suffers from inadequate mechanical performances for various applications. Nanoparticles could be used to form high‐performance magnesium matrix nanocomposites. Among all nanoparticles, TiB2 has great potentials to enhance the mechanical property of AZ91D. This paper studies the microstructures and mechanical property of AZ91D‐TiB2 nanocomposites fabricated through solidification nanoprocessing. TiB2 nanoparticles with a diameter of 25 nm are effectively fed into the AZ91D melt through a newly developed automatic nanoparticle‐feeding system. Ultrasonic cavitation is used to disperse these nanoparticles in AZ91D melt for casting. With 2.7 wt% (about 1.0 vol%) of TiB2 nanoparticles addition, the mechanical property of AZ91D is much enhanced (by 21, 16, and 48% for yield strength, tensile strength, and ductility, respectively). Microstructural analysis with optical microscope, SEM, and S/TEM show that α‐Mg grain and a network of massive brittle intermetallic phase (β‐Mg17Al12) are simultaneously refined and modified. Further study suggests that the enhancement of mechanical properties of AZ91D is attributed not only to primary phase grain refinement, but also to the modification of intermetallic β‐Mg17Al12 by TiB2 nanoparticles. A novel solidification nanoprocessing method with liquid state ultrasonic processing and automatic nanoparticle‐feeding system is developed to effectively incorporate and disperse TiB2 nanoparticles into AZ91D melt. The fabricated AZ91D‐TiB2 nanocomposites show much enhanced mechanical properties. The enhancement of mechanical properties is attributed to the simultaneous refinement of primary α‐Mg grains and morphology modification of β‐Mg17Al12 phase networks by TiB2 nanoparticles.

A New Powder Metallurgy Routine to Fabricate TiB2/Al–Zn–Mg–Cu Nanocomposites Based on Composite Powders with Pre-Embedded Nanoparticles

Preparation of Ti/Al based nanophase composite powder by mechanical alloying

Preparation of ti-al based nanophase composite powder by mechanical alloying

Novel Composite Powders with Uniform Tib2 Nano-Particle Distribution for 3d Printing

Mechanical Alloying and Spark Plasma Sintering of Ni-Al-Ti-B Powders for Fabricating Nanocrystailine (Tib+tib2)/ni-3(Al, Ti) Composite

Enhancing Dispersion of TiB2 Nanoparticles in Al Composites Via Ultrasonic-Assisted Fast Cooling Schemes

TiB2/TiC nano-composite powder fabricated via high energy milling

Spark Plasma Sintering Mechanisms of the Al-Zn-Mg-Cu Alloys and TiB2/Al-Zn-Mg-Cu Composites

Controlling the sizes of in-situ TiC nanoparticles for high-performance TiC/Al–Cu nanocomposites

AZ91D/TiB2 Nanocomposites Fabricated by Solidification Nanoprocessing

In-situ synthesized TiC/Ti-6Al-4V composites by elemental powder mixing and spark plasma sintering: Microstructural evolution and mechanical properties

Carbon Nanotubes As a Unique Agent to Fabricate Nanoceramic/metal Composite Powders for Additive Manufacturing

Powder preparation during ball milling and laser additive manufacturing of aluminum matrix nanocomposites: Powder properties, processability and mechanical property

Microstructure, properties and reaction kinetics of a Cu–Al2O3–TiB2 alloy prepared by a new liquid phase in-situ reaction technology

Preparation and Characterization of TiB2/Al3Ti/Al2O3 Composite Nano-powder

Preparation of in situ TiC@TiN core–shell and Ti2N–Al4C3 nanoparticles and their effects on Al–Zn–Mg–Cu alloy

In Situ Preparation of (tib + TiC + Nd2O3)/Ti Composites by Powder Metallurgy

Design of an Efficient Flake Powder Metallurgy Route to Fabricate CNT/6061Al Composites

Microstructure and Mechanical Properties of In Situ TiB2/2024 Composites Fabricated by Powder Metallurgy

Interfacial/intragranular reinforcement of titanium-matrix composites produced by a novel process involving core-shell structured powder

Towards High Strengthening Efficiency by In-Situ Planting Nano-Tib Networks into Titanium Matrix Composites