Abstract:The aim of this study is to obtain semisolid billet of the 5 wt.% TiB 2(p) /Al-Cu composite with superior thixotropic behaviors using an equal channel angular pressing-strain induced melt activation (ECAP-SIMA) method. The effects of semisolid isothermal treatment (SSIT) on the microstructure evolution of the as-cast composite were investigated. The results indicate that the α -Al grains first partially melted followed by subsequent growth and spheroidization with increasing holding time. Ostwald ripening is the primary coarsening mechanism. However, after heating at 620–630 °C for 20 min, the coalescence mechanism plays a dominant role in grain growth. In addition, the TiB 2 particles distributed at the grain boundaries can inhibit the coarsening of the α -Al grains. The optimal SSIT parameter (630 °C, 10 min) was chosen based on the comprehensive comparison of the microstructure under different SSIT conditions. Three different ECAP techniques were employed as the pre-deformation step for the SIMA method, resulting in the reduction of the average grain size, but increasing the average shape factor. The subsequent SSIT process can help realize the further grain refinement and slightly improve the roundness of α -Al grains in the ECAP-SIMA composite, thereby improving its formability. Moreover, the ECAP-SIMA composite exhibits enhanced tensile properties than those of the as-cast and SSIT composites, attributed to its refined α -Al grains and the uniform distribution of TiB 2 particles.

Microstructure and Mechanical Properties of In Situ TiB2/2024 Composites Fabricated by Powder Metallurgy

Effect of TiB_2 content on microstructure and mechanical properties of in-situ fabricated TiB_2/B_4C composites

Enhancing strength-ductility synergy in nano-sized TiB 2 /Al composite via rapid solidification and thermo-mechanical processing

Microstructure and Mechanical Properties of Aluminum Matrix Composites Reinforced With In-Situ TiB2 Particles

The Effect of Micron-Sized TiB2 Particles on the Properties of Al6061 Strengthened with 4% TiB2 Nano-TiB2

Microstructure, mechanical properties and strengthening mechanisms of Mg matrix composites reinforced with in situ nanosized TiB2 particles

Microstructure and Properties of In-Situ TiC Reinforced Copper Nanocomposites Fabricated Via Long-Term Ball Milling and Hot Pressing

Microstructures and mechanical properties of in-situ TiB2/Al−xSi−0.3Mg composites

Microstructural evolution and mechanical properties of TiB2/2195 composites fabricated by ultrasonic-assisted in-situ casting

An Investigation of Microstructural Evolution, Tensile Properties and Work-Hardening Behavior of Nanosized TiB2/Al-Cu-Mn Composites

Mechanical property and microstructure of in-situ TiB/Ti composites via vacuum sintering and hot rolling

Microstructure and mechanical properties of an in-situ TiB2 particle reinforced AlSi10Mg composite additive manufactured by selective electron beam melting

Microstructure and Mechanical Properties of TiB2-Al2O3 Composites

In-Situ Synthesis, Microstructure, and Mechanical Properties of TiB2-Reinforced Fe-Cr-Mn-Al Steel Matrix Composites Prepared by Spark Plasma Sintering

Processing, microstructure and ageing behavior of in-situ submicron TiB2 particles reinforced AZ91 Mg matrix composites

Microstructure and mechanical properties of TiB 2 -Al 2 O 3 composites

Hot Deformation Behavior and Workability of In-Situ TiB2/7050Al Composites Fabricated by Powder Metallurgy

Microstructure Evolution and Tensile Properties of In Situ TiB2(p)/Al-Cu Composite Processed by Modified Strain-Induced Melt Activation Method with Equal Channel Angular Pressing Pre-deformation

Effect of TiB2 content on microstructure and properties of in situ Ti-TiB composites

Experimental verification and numerical analysis on plastic deformation and mechanical properties of the in-situ TiB2 homogeneous composites and TiB2/Cu network composites prepared by powder metallurgy

Numerical evaluation and experimental verification of mechanical properties and fracture behavior for TiB2/Cu composites prepared by in-situ mixing casting