Abstract:TiC/Al–Cu nanocomposites were fabricated in Al–Ti–C powder systems using carbon black, a mixture of C and carbon nanotubes (C + CNTs), and CNTs via an in-situ method involving combustion synthesis and hot pressing. As the carbon source changed from pure carbon black to the C + CNT mixture and pure CNTs, the size of the TiC nanoparticles decreased gradually. The nanocomposites synthesized based on the C + CNT mixture exhibited the most uniform dispersion of TiC nanoparticles. The 30 vol% TiC/Al–Cu nanocomposite prepared from the C + CNT mixture had the best comprehensive mechanical properties (yield strength (411 MPa), compressive strength (712 MPa), fracture strain (17.2%), hardness (206.8 HV), and wear resistance under the experimental conditions due to having the most uniformly dispersed TiC nanoparticles. The wear mechanism was a combination of plastic deformation, abrasion, and adhesion. This method may be a low-cost and convenient means to control the sizes of in-situ TiC nanoparticles and prepare high-performance TiC/Al–Cu nanocomposites.

What problem does this paper attempt to address?

The key problem that this paper attempts to solve is: how to control the size of in - situ - generated TiC nanoparticles and their dispersibility in the Al - Cu matrix by controlling the types of carbon sources (pure carbon black, a mixture of carbon black and carbon nanotubes, pure carbon nanotubes), so as to prepare TiC/Al - Cu nanocomposites with excellent mechanical properties and wear resistance. Specifically, the main research objectives include: 1. **Regulating the size of TiC nanoparticles**: - By changing the carbon source (from pure carbon black to a mixture of carbon black and carbon nanotubes and then to pure carbon nanotubes), gradually reduce the size of TiC nanoparticles. - It has been found that when using a mixture of carbon black and carbon nanotubes as the carbon source, the size of TiC nanoparticles is the most uniform and the average size is the smallest. 2. **Improving the dispersibility of TiC nanoparticles**: - When using a mixture of carbon black and carbon nanotubes as the carbon source, the dispersibility of TiC nanoparticles in the composite is the best, reducing the formation of non - uniform regions. - This uniform dispersion helps to improve the overall mechanical properties of the composite. 3. **Enhancing the mechanical properties and wear resistance of the composite**: - The prepared 30 vol% TiC/Al - Cu nanocomposite (using a mixture of carbon black and carbon nanotubes) exhibits the best comprehensive mechanical properties, including yield strength (411 MPa), compressive strength (712 MPa), fracture strain (17.2%), hardness (206.8 HV) and wear resistance. - Research shows that the wear mechanism of this composite is mainly a combination of plastic deformation, abrasive wear and adhesive wear. 4. **Exploring low - cost and simple preparation methods**: - This research provides a low - cost, simple and effective method to synthesize TiC/Al - Cu nanocomposites with improved TiC nanoparticle distribution, excellent mechanical properties and wear resistance. Through these efforts, the research aims to provide a high - performance lightweight material for industrial applications (such as electronic packaging engineering, heat sinks, aerospace and the automotive industry).

Controlling the sizes of in-situ TiC nanoparticles for high-performance TiC/Al–Cu nanocomposites

Microstructure and Properties of In-Situ TiC Reinforced Copper Nanocomposites Fabricated Via Long-Term Ball Milling and Hot Pressing

Investigation on microstructure and properties of TiC0.5-Al2O3/Cu composites fabricated by a novel in-situ reactive synthesis

Fabrication and Properties of Nano-TiCx/Cu-Cr-Zr Alloy Composites

Preparation and Characterization of In Situ (TiC-TiB2)/Al-Cu-Mg-Si Composites with High Strength and Wear Resistance

Effects of TiC0.5N0.5 Nanoparticles on the Microstructure, Mechanical and Thermal Properties of TiC0.5N0.5/Al-Cu Nanocomposites

Microstructure, mechanical properties and strengthening mechanism of in-situ synthesized TiC/6061 nanocomposites

Optimization of the mechanical properties of CNTs/Cu composite by regulating the size of interfacial TiC

Microstructure, Microhardness, Fracture Toughness, and Abrasive Wear of In-Situ Synthesized TiC/Ti-Al Composite Coatings by Cold Spraying Combined with Heat Treatment

Abrasive Wear and Physical Properties of In-Situ Nano-TiCx Reinforced Cu–Cr–Zr Composites

Effect of Cu-Ti-C Reaction Composition on Reinforcing Particles Size of TiCx/Cu Composites

Tuning composition and microstructure by doping Ti and C for enhancing mechanical property and wear resistance of Al0.2Co1.5CrFeNi1.5Ti0.5 high entropy alloy matrix composites

The microstructures of in-situ synthesized TiC by Ti-CNTs reaction in Cu melts

Preparation of in situ TiC@TiN core–shell and Ti2N–Al4C3 nanoparticles and their effects on Al–Zn–Mg–Cu alloy

In Situ Synthesis of Ti2AlC–Al2O3/TiAl Composite by Vacuum Sintering Mechanically Alloyed TiAl Powder Coated with CNTs

Microstructure and wear properties of TiC-Al composite fabricated by field activated and low-pressure assisted combustion synthesis

Reaction-induced nano-sized TiC in additive manufactured Ni-Co based superalloy

Ni composites reinforced with ultrafine and uniform TiCx and Cr3C2 particles in situ: Enhanced properties and a well-matched interface

Fabrication of TiC-graphene dual-reinforced self-lubricating Al matrix hybrid nanocomposites with superior mechanical and tribological properties

Synthesis of uniformly dispersed carbon nanotube reinforcement in Al powder for preparing reinforced Al composites

Compression Properties and Electrical Conductivity of In-Situ 20 vol.% Nano-Sized TiC x /Cu Composites with Different Particle Size and Morphology.