Abstract:Efficient coupling between optical fibers and on-chip photonic waveguides has long been a crucial issue for photonic chips used in various applications. Edge couplers (ECs) based on an inverse taper have seen widespread utilization due to their intrinsic broadband operation. However, it still remains a big challenge to realize polarization-insensitive low-loss ECs working at the O-band (1,260–1,360 nm), mainly due to the strong polarization dependence of the mode coupling/conversion and the difficulty to fabricate the taper tip with an ultra-small feature size. In this paper, a high-efficiency and polarization-insensitive O-band EC is proposed and demonstrated with great advantages that is fully compatible with the current 130-nm-node fabrication processes. By introducing an asymmetric bi-level dual-core mode converter, the fundamental mode confined in the thick core is evanescently coupled to that in the thin core, which has an expanded mode size matched well with the fiber and works well for both TE/TM-polarizations. Particularly, no bi-level junction in the propagation direction is introduced between the thick and thin waveguide sections, thereby breaking the critical limitation of ultra-small feature sizes. The calculated coupling loss is 0.44–0.56/0.48–0.61 dB across the O-band, while achieving 1-dB bandwidths exceeding 340/230 nm for the TE/TM-polarization modes. For the fabricated ECs, the peak coupling loss is ∼0.82 dB with a polarization dependent loss of ∼0.31 dB at the O-band when coupled to a fiber with a mode field diameter of 4 μm. It is expected that this coupling scheme promisingly provides a general solution even for other material platforms, e.g., lithium niobate, silicon nitride and so on.

Triple-Tip Spot Size Converter for Broadband, Polarization-Insensitive and Efficient Fiber-to-Chip Edge Coupling

Compact Spot-Size Converter for Low-Loss Coupling and Miniaturization of Interferometric Fiber Optic Gyroscopes

Broadband Polarization-Independent Directional Coupler Using Asymmetric-Waveguides

CMOS-Compatible Ultralow-Loss Three-Step Silicon Edge Coupler with Substrate Substitution in the Whole Communication Band

An Optimization Method of the Spot-Size Converter

High-efficiency Grating Coupler Based on Fast Directional Optimization and Robust Layout Strategy in 130 Nm CMOS Process.

Broad-band Efficient Edge Couplers for Compact Silicon Photonic Circuits

Efficient and Polarization Insensitive Edge Coupler Based on Cascaded Vertical Waveguide Tapers.

Design and Optimization of a High-Efficiency 3D Multi-Tip Edge Coupler Based Lithium Niobate on Insulator Platform

Low Loss Polymeric Spot-Size Converter with Two-Step Index Transition Cladding for Fiber-to-chip Connection.

Proposal and analysis of a double-tip coupler for efficient coupling fiber to slot and strip waveguides

Efficient and Broadband Trident Spot-Size Convertor for Thin-Film Lithium Niobate Integrated Device

Y-Branch Spot-Size Converter for A Buried Silica Waveguide with Large Index Difference

Asymmetric bi-level dual-core mode converter for high-efficiency and polarization-insensitive O-band fiber-chip edge coupling: breaking the critical size limitation

Broadband and easily fabricated double-tip edge coupler based on thin-film lithium niobate platform

Broadband Coupler Between Silicon Waveguide and Hybrid Plasmonic Waveguide

Broadband Polarization-Independent Edge Couplers With High Efficiency Based on SiN-Si Dual-Stage Structure

Compact and Low-Loss 1 × 3 Polarization-Insensitive Optical Power Splitter Using Cascaded Tapered Silicon Waveguides

A Compact Adiabatic Silicon Photonic Edge Coupler Based on Silicon Nitride/Silicon Trident Structure

A Feasible Method for Fabricating Vertical Taper Applied to Spot Size Converter

A low-loss, compact, broadband, polarization insensitive edge coupler for silicon photonics