Abstract:A single-polarization (SP) coupler based on air-core photonic bandgap fibers (PBFs) is proposed and numerically simulated. The physical mechanism is the decoupling phenomenon occurring at special separations between the cores of the dual-core PBFs called decoupling points. The coupling length of one polarization in the coupler tends to be infinite while the coupling length of other polarization remains in normal level. The coupling ratio for the primary polarization can vary by adjusting the length of the coupler since the other polarization is always decoupled out at any length of the coupler. When this novel SP coupler is incorporated into a PBFs based fiber ring resonator, its unique polarization property is theoretically simulated. In this full-PBFs configuration, the SP coupler functions as the power splitter and the polarizer simultaneously. By the finite element method, the feasibility of the SP coupler to filter the secondary eigenstate of polarization (ESOP) propagating in the resonator is proved. And the performance of the SP coupler to suppress the temperature-related polarization fluctuation in the resonant fiber optic gyro is promised to be more significant to the in-line polarizer integrating in the resonator. Furthermore, the mechanism of decoupling phenomenon in the SP coupler and the influence of polarization-axis angular misalignment are discussed. In conclusion, an optimized SP coupler can couple the primary ESOP properly, and a polarization extinct ratio larger than 30 dB can be achieved within the angular misalignment of 0.9 degree. The aforementioned unique properties make this novel SP coupler attractive for the resonant fiber optic gyro.

Compact Spot-Size Converter for Low-Loss Coupling and Miniaturization of Interferometric Fiber Optic Gyroscopes

Experimental Study and Analysis of High Sensitivity Interferometric Fiber Optic Gyroscope Using Multi-Core Fiber

Spot-Size Converter Based on Long-Period Grating

Three-axis Interferometric Fiber Optic Gyroscope with Silica Integrated Coupler Chip

Efficient Spot Size Converter for Higher-Order Mode Fiber-Chip Coupling

Ultra-compact spot size converter based on digital metamaterials

Optical Path Design and Optimization of a Small Fiber Optic Gyroscope

Compact polarization transceiver module for fiber optic gyroscopes

Spot-Size Converter of Thin-film Lithium Niobate on Quartz Substrate

An Optimization Method of the Spot-Size Converter

Fabrication and Optical Optimization of Spot-Size Converters with Strong Cladding Layers

Single-Polarization Coupler Based on Air-Core Photonic Bandgap Fibers and Implications for Resonant Fiber Optic Gyro

A Compact Four-Axis Interferometric Fiber Optic Gyroscope Based on Multiplexing for Space Application

Miniaturized Interferometric Fiber Optical Gyroscopes for Space Application

Compact Vertical Grating Coupler with an Achromatic In-Plane Metalens on a 220-Nm Silicon-on-insulator Platform

&Lt;title>design and Fabrication of GaAs-integrated Optical Chip Used in a Fiber Optic Gyroscope</title>

Multi-Poly-Silicon-Layer-Based Spot-Size Converter for Efficient Coupling Between Silicon Waveguide and Standard Single-Mode Fiber

Compact Resonant Fiber-Optic Gyroscope with a Broadband Light Source

A Polarization Multiplexing Interferometric Fiber Optic Gyroscope with Faraday Effect and Shupe Effect Compensation

A Miniaturized Compact Open-Loop RFOG with Demodulation Signal Compensation Technique to Suppress Intensity Modulation Noise

High-efficient and compact vertical grating coupler with achromatic in-plane metalens