Abstract:We present a design of a laterally tapered optical waveguide mode-size converter from super luminescent diode (SLD) to silica-based planar lightwave circuit (PLC). The mode-size converter is based on silica-based PLC. By using three dimensional semi-vectorial beam propagation methods, laterally tapered waveguides with different boundaries are simulated and compared with each other, where the factors of polarization-dependent loss and coupling loss are mainly focused on. The results show that the most influential factor for polarization-dependent loss is the ratio of the divergence angle of SLD in the horizontal direction and the vertical direction. The refractive index difference. between core layer and cladding layer, core width of endface and taper length influence coupling loss mostly, while the effect of all side boundaries is within 0.05 dB. We also investigate the SLD misalignment tolerance and wavelength bandwidth's impact on coupling loss. Furthermore, we examine the performance of the mode-size converter based on a particular SLD which has a divergence angle of 30 degrees x45 degrees. By optimizing the parameters of the tapered waveguide, the coupling efficiency is increased to 62.4% and the polarization-dependent loss is reduced to 0.035 dB. Meanwhile, it enables us to reduce the coupling loss variation to 0.05dB with core width of endface fabrication tolerance of +/- 0.5 mu m and taper length tolerance of +/- 0.5 mm. The proposed mode-size converter has been demonstrated to be well performed, implying its application in the optical transceiver module using SLD as light source and hybrid integration of III-V semiconductor waveguiding devices and PLCs.

Y-Branch Spot-Size Converter for A Buried Silica Waveguide with Large Index Difference

Polarization Insensitive and Low-Loss Coupling Mode-Size Converter from Super Luminescent Diode to Silica-Based Planar Lightwave Circuit

Subwavelength-diameter Silica Wire for Light In-Coupling to Silicon-Based Waveguide

Comparison of Fiber-to-Waveguide Couplers in Point Diffraction Interferometer Based on Waveguide Reference Wavefront Source

Optimized Design of Cascaded Y-branch Waveguide

An Optimization Method of the Spot-Size Converter

Broadband and High Uniformity Y Junction Optical Beam Splitter with Multimode Tapered Branch

Novel Design of Y-branch in LiNbO 3 by Proton Exchange

Low Loss, High Extinction Ratio Plasmonic Spot Size Converter

Y-branch Edge Coupler Between Cleaved Single Mode Fiber and Nano-Scale Waveguide on Silicon-on-insulator Platform

Broadband Coupler Between Silicon Waveguide and Hybrid Plasmonic Waveguide

Compact broadband silicon 3 dB coupler based on shortcuts to adiabaticity.

Low-loss 3-dimensional waveguide crossing with a parabolic taper interlayer coupler based on a SiN-SiN-Si three-layer platform

Efficient Adiabatic Silicon-on-insulator Waveguide Taper

Design and Fabrication of Multimode Interference Coupler with Strong Confinement Structure on Silicon-On-Insulator

Asymmetric Plasmonic-Dielectric Coupler with Short Coupling Length, High Extinction Ratio, and Low Insertion Loss.

Robust Slab-Coupled Buried-Rib Semiconductor Laser with High Fibre Coupling Efficiency

Novel tapered optical fiber coupler

A low-loss Y-branch with a multimode waveguide transition section

Optimal design method of a low-loss broadband Y branch with a multimode waveguide section.

High Efficiency Silicon Edge Coupler Based on Uniform Arrayed Waveguides with Un-Patterned Cladding