Abstract:In this study, two different adiabatic couplers are proposed based on the adiabatic mode evolution mechanism in the two-waveguide system. The mode conversion/transfer in vertically asymmetric adiabatic couplers is investigated. The proposed adiabatic couplers couple the beam modes from one waveguide to another using adiabatic mode evolution and enable the mode conversion/transfer between the designed modes. The k -vector frequency-dispersion diagram for the first adiabatic coupler is calculated, and the variation of the guided mode in the adiabatic coupler with the waveguide width is shown to guide the design of adiabatic couplers. The design results demonstrate that the proposed adiabatic mode couplers are substantially shorter than the linear-shape connection, but can achieve the same power mode conversion efficiency. The main function of the first adiabatic mode coupler designed is to convert the TE 0 mode in one port to the TM 0 mode in the other port, the structure only needs a length of 108 μm to achieve 90 % power conversion efficiency, and the traditional linear-shape connection requires 1540 μm to achieve the same conversion efficiency. As a result, the proposed adiabatic coupler size is 14 times shorter than the conventional design. Moreover, in the design of the second 3-dB adiabatic coupler, the adiabatic mode evolution transfer of the two lowest-order even and odd eigenmodes is implemented in a two tapered ridge waveguide system for 3-dB energy splitting. The proposed coupler will achieve a transfer efficiency greater than 90 % in the range of 1400 nm to 3760 nm when the device length is 47.5 μm, which is an ultra-wide operating bandwidth range.

Efficient Adiabatic Silicon-on-insulator Waveguide Taper

Ultrashort And Efficient Adiabatic Waveguide Taper Based On Thin Flat Focusing Lenses

Compact And Efficient Large Cross-Section Soi Rib Waveguide Taper Optimized By A Genetic Algorithm

Ultracompact Adiabatic Tapered Coupler For The Si/Iii-V Heterogeneous Integration

Compact broadband silicon 3 dB coupler based on shortcuts to adiabaticity.

Ultralow-loss Waveguide Crossing for Photonic Integrated Circuits by Using Inverted Tapers

Broadband Coupler Between Silicon Waveguide and Hybrid Plasmonic Waveguide

High Efficiency Grating Coupler for Coupling Between Single-Mode Fiber and SOI Waveguides

Compact and efficient coupler to interface hybrid dielectric-loaded plasmonic waveguide with silicon photonic slab waveguide

Si Photonic Wire Waveguide Devices

High-efficiency Apodized-Imaging Chip-Fiber Grating Coupler for Silicon Nitride Waveguides

Silicon Two-Mode Multi/demultiplexer Based on Tapered Couplers

Silicon-on-Insulator Waveguide Devices for Broadband Mid-Infrared Photonics

Efficient light coupling between an ultra-low loss lithium niobate waveguide and an adiabatically tapered single mode optical fiber

Low-loss 3-dimensional waveguide crossing with a parabolic taper interlayer coupler based on a SiN-SiN-Si three-layer platform

Design of efficient and compact adiabatic couplers based on adiabatic mode evolutions

Compact and Low-Loss 1 × 3 Polarization-Insensitive Optical Power Splitter Using Cascaded Tapered Silicon Waveguides

Mid-infrared Nonlinear Silicon Hybrid Waveguide with High Figure of Merit

Reduction of Silicon Waveguide Endface Reflection Using a Taper

Mode conversion in tapered submicron silicon ridge optical waveguides.

Low-cost and high-efficiency single-mode-fiber interfaces to silicon photonic circuits