Abstract:Single mode tapered waveguide (spot-size converter) can transmit the optical field with low loss. The less loss is very important for highly integrating optic devices. For the integrating optic device use the weak waveguide in order to keep the small ellipse field, like 2-3um. But standard single mode fiber has a large diameter like 9-11um, and a round field. If we want to get the effective coupling, the spot-size converter must be used. These kinds of spot-size converter waveguide are designed so that the effective values of the normalized frequency are nearly the same everywhere and the shape of the mode field is basically kept Gauss. Then it can get the low loss coupling between the integrated waveguide and fiber with Gauss field.[1] In this paper, an optimal method was used to find the lateral of the spot-size converter after give both the end size. It must point out that this paper's conclusion is just the theoretical computation conclusion. In general, the BPM method can be used to design the low loss tapered waveguide. In this paper, under the background of FD-BPM method, the neural network' nonlinear property was used to find the optimal low loss boundary of the taper waveguide through the net learning. This paper describes a process of design a waveguide spot-size converter lateral side. After the process, the spot-size converter waveguide can get low radiation loss and coupling in highly effect. And the paper also presents a method for finding the optimal boundary of the SSCs.

Optimal design method of a low-loss broadband Y branch with a multimode waveguide section.

Optimized Design of Cascaded Y-branch Waveguide

Novel Design of Y-branch in LiNbO 3 by Proton Exchange

Design for Y-branch Waveguides with Wide Angle and Low Loss

A low-loss Y-branch with a multimode waveguide transition section

Optimizing Design to Optical Waveguide Bend Structure

Design and analysis for wide-angle low-loss Y-branch waveguides with graded-index profiles

An Optimization Method of the Spot-Size Converter

5×5 Μm2 Compact Waveguide Crossing Optimized by Genetic Algorithm

Optimal Design of a Silicon-on-insulator Nanowire Waveguide for Broadband Wavelength Conversion

Optimal Design for Wide-Band Single-Mode Two-Dimensional Photonic Crystal Waveguides: Role of Waveguide Width

Geometrical Optimization of Arrayed Waveguide Grating with Low Diffraction Order

Low-loss 3-dimensional waveguide crossing with a parabolic taper interlayer coupler based on a SiN-SiN-Si three-layer platform

Optimization of Deep-Etched,Single-Mode GaAs/GaAlAs Optical Rib Waveguides Using Discrete Spectral Index Method

A Low-Loss Broadband Y-Branch for Fiber to the Home Applications

Optimization Design for Polymeric S-shaped Ridge Waveguide

Topology Optimization of Low-Loss Z-Bend 2D Photonic Crystal Waveguide

Y-Branch Spot-Size Converter for A Buried Silica Waveguide with Large Index Difference

Mode Analyzing Method for Fast Design of Branch Waveguide Coupler

Misaligned Waveguide-Based Branch Waveguide Structure for Amplitude Imbalance Improvement in Branch-Guide Coupler

Optimization of T-shaped Waveguide Branches in Two-Dimensional Photonic Crystals