Abstract:We report on the design, fabrication and testing of three types of coupling structures for hybrid chalcogenide glass Ge23Sb7S70-Silicon (GeSbS-Si) photonic integrated circuit platforms. The first type is a fully etched GeSbS grating coupler defined directly in the GeSbS film. Coupling losses of 5.3 dB and waveguide-to-waveguide back-reflections of 3.4% were measured at a wavelength of 1553 nm. Hybrid GeSbS-to-Si butt couplers and adiabatic couplers transmitting light between GeSbS and Si single-mode waveguides were further developed. The hybrid butt couplers (HBCs) feature coupling losses of 2.7 dB and 9.2% back-reflection. The hybrid adiabatic couplers (HACs) exhibit coupling losses of 0.7 dB and negligible back-reflection. Both HBCs and HACs have passbands exceeding the 100 nm measurement range of the test setup. GeSbS grating couplers and GeSbS-to-Si waveguide couplers can be co-fabricated in the same process flow, providing, for example, a means to first couple high optical power levels required for nonlinear signal processing directly into GeSbS waveguides and to later transition into Si waveguides after attenuation of the pump. Moreover, GeSbS waveguides and HBC transitions have been fabricated on post-processed silicon photonics chips obtained from a commercially available foundry service, with a previously deposited 2 μm thick top waveguide cladding. This fabrication protocol demonstrates the compatibility of the developed integration scheme with standard silicon photonics technology with a complete back-end-of-line process.

Broad-band Efficient Edge Couplers for Compact Silicon Photonic Circuits

CMOS-Compatible Ultralow-Loss Three-Step Silicon Edge Coupler with Substrate Substitution in the Whole Communication Band

High-efficiency Wideband SiNx-on-SOI Grating Coupler with Low Fabrication Complexity.

Compact broadband silicon 3 dB coupler based on shortcuts to adiabaticity.

A Compact Adiabatic Silicon Photonic Edge Coupler Based on Silicon Nitride/Silicon Trident Structure

A low-loss, compact, broadband, polarization insensitive edge coupler for silicon photonics

Broadband Polarization-Independent Edge Couplers With High Efficiency Based on SiN-Si Dual-Stage Structure

Broadband and easily fabricated double-tip edge coupler based on thin-film lithium niobate platform

Broadband Coupler Between Silicon Waveguide and Hybrid Plasmonic Waveguide

Edge Couplers in Silicon Photonic Integrated Circuits: A Review

Integrated Broadband Filter with Sharp Transition Edges Based on SiN and SiON Composite Waveguide Coupler

Low-loss and high stability standard single mode fiber edge couplers for silicon photonics

Ltra-Compact Silicon Photonic Edge Coupler Based On Subwavelength Gratings

3D trapezoidal edge coupler with high efficiency and tolerance based on Silicon-on-Insulator

High-efficiency Grating Coupler Based on Fast Directional Optimization and Robust Layout Strategy in 130 Nm CMOS Process.

Broadband Couplers for Hybrid Silicon-Chalcogenide Glass Photonic Integrated Circuits

High Efficiency Grating Coupler for Coupling Between Single-Mode Fiber and SOI Waveguides

High Efficiency Silicon Edge Coupler Based on Uniform Arrayed Waveguides with Un-Patterned Cladding

Compact and efficient coupler to interface hybrid dielectric-loaded plasmonic waveguide with silicon photonic slab waveguide

High-efficiency edge couplers enabled by vertically tapering on lithium-niobate photonic chips

Development of Silicon Photonic Devices for Optical Interconnects