Abstract:In this paper, a high‐efficiency edge coupler based on an alumina‐on‐insulator platform is introduced and experimentally validated. The coupler employs a symmetric double‐tip taper and a multimode interference‐based combiner. A coupling loss of 2.85 dB/facet has been achieved at λ = 407 nm, which is the lowest on this platform to the best of the knowledge. Integrated photonics is demanded in applications operating at ultraviolet to visible wavelengths, such as atomic/quantum systems, on‐chip broadband receivers, and far‐field structured illumination autofluorescence microscopy. A fundamental challenge in these applications is efficient edge coupling from a single‐mode fiber (SMF) to on‐chip photonic components, which is critical for on‐chip integration. In this paper, a high‐efficiency edge coupler based on an alumina‐on‐insulator platform is introduced and experimentally validated. The coupler employs a symmetric double‐tip taper and a multimode interference (MMI)‐based optical combiner. The double‐tip taper effectively expands the mode field diameter at the chip facet to match that of the SMF at the initial stage. Then the MMI‐based combiner efficiently combines the two channels in the taper into a highly confined strip waveguide. A coupling loss of 2.85 dB/facet has been achieved for the transverse magnetic mode at the wavelength of 407 nm, which is the lowest insertion loss for fiber‐chip coupling on this platform to the best of the knowledge. The design can significantly reduce the insertion loss associated with fiber‐chip coupling, offering a key component for diverse areas ranging from atomic/quantum photonic integrated circuits and ultra‐high capacity communications to optical microscopes.

3D trapezoidal edge coupler with high efficiency and tolerance based on Silicon-on-Insulator

Broad-band Efficient Edge Couplers for Compact Silicon Photonic Circuits

CMOS-Compatible Ultralow-Loss Three-Step Silicon Edge Coupler with Substrate Substitution in the Whole Communication Band

High Efficiency Grating Coupler for Coupling Between Single-Mode Fiber and SOI Waveguides

High-efficiency Grating Coupler Based on Fast Directional Optimization and Robust Layout Strategy in 130 Nm CMOS Process.

High-efficiency Wideband SiNx-on-SOI Grating Coupler with Low Fabrication Complexity.

Design and Optimization of a High-Efficiency 3D Multi-Tip Edge Coupler Based Lithium Niobate on Insulator Platform

High-efficiency Suspended Three-Tip Edge Coupler for Mid-infrared Photonics

High Efficiency Silicon Edge Coupler Based on Uniform Arrayed Waveguides with Un-Patterned Cladding

Menis Siob Design For Integrated Transceiver Application

A simplified laser-to-chip edge coupling scheme using 3D SU-8 taper

Low-loss and high stability standard single mode fiber edge couplers for silicon photonics

Broadband Couplers for Hybrid Silicon-Chalcogenide Glass Photonic Integrated Circuits

Optical Via for Silicon Photonic 3D-Integrations

A Compact Adiabatic Silicon Photonic Edge Coupler Based on Silicon Nitride/Silicon Trident Structure

High-Efficiency Unidirectional Dual-Wavelength-Band Grating Coupler with 1D Subwavelength Structure

Ultra-Compact Birefringence-Compensated Arrayed Waveguide Grating Triplexer Based on Silicon-On-Insulator

Edge Couplers in Silicon Photonic Integrated Circuits: A Review

Interlayer Slope Waveguide Coupler for Multilayer Chalcogenide Photonics

Low-loss 3-dimensional waveguide crossing with a parabolic taper interlayer coupler based on a SiN-SiN-Si three-layer platform

High‐Efficiency Fiber‐Chip Edge Coupler for Near‐Ultraviolet Integrated Photonics