Abstract:Edge coupler is a key component of silicon-based optoelectronic chips, which dramatically reduces the coupling loss between fibers and transmission waveguides. Here, we propose an ultralow-loss three-step silicon edge coupler based on a 130 nm CMOS process. By replacing the silicon substrate with a material with a lower refractive index than silicon oxide, the silicon leakage loss and polarization-dependent loss can be significantly improved. This structure avoids the existence of a cantilever, which enhances the mechanical strength of the edge coupler. Coupling with standard single-mode fiber, the simulation results demonstrate that the TE/TM mode has an ultralow loss of 0.63/1.08 dB at 1310 nm and 0.57/1.34 dB at 1550 nm, and the 0.5 dB bandwidth covering the entire communication band is about 400 nm. In the entire communication band, the polarization-dependent loss is less than 0.8 dB. Furthermore, we propose a taper shape design method based on mode analysis, which can be adapted for any taper to improve its compactness. Compared with the parabolic shape, the coupling loss of the edge coupler with a length of 460 μm for the TE mode is improved by 0.3 dB on average, this edge coupler provides a feasible solution for fiber-to-chip coupling and is perfectly suitable for wavelength division multiplexing applications in optical communications.

A Compact Adiabatic Silicon Photonic Edge Coupler Based on Silicon Nitride/Silicon Trident Structure

Broad-band Efficient Edge Couplers for Compact Silicon Photonic Circuits

Compact broadband silicon 3 dB coupler based on shortcuts to adiabaticity.

CMOS-Compatible Ultralow-Loss Three-Step Silicon Edge Coupler with Substrate Substitution in the Whole Communication Band

Ltra-Compact Silicon Photonic Edge Coupler Based On Subwavelength Gratings

High-Performance Silicon Nitride Fork-shape Edge Coupler

High-efficiency Wideband SiNx-on-SOI Grating Coupler with Low Fabrication Complexity.

High-efficiency Grating Coupler Based on Fast Directional Optimization and Robust Layout Strategy in 130 Nm CMOS Process.

Fabrication-friendly High-Efficiency Silicon Nitride Grating Coupler

Ultracompact Fiber-to-Chip Metamaterial Edge Coupler

High Efficiency Silicon Edge Coupler Based on Uniform Arrayed Waveguides with Un-Patterned Cladding

Compact and efficient coupler to interface hybrid dielectric-loaded plasmonic waveguide with silicon photonic slab waveguide

Experimental Demonstration of an Apodized-Imaging Chip-Fiber Grating Coupler for Si_3N_4 Waveguides

Broadband Polarization-Independent Edge Couplers With High Efficiency Based on SiN-Si Dual-Stage Structure

A Theoretical Sub-0.1 Db Loss Single Mode Fiber-To-Chip Edge Coupler for Silicon Nitride Waveguides

A low-loss, compact, broadband, polarization insensitive edge coupler for silicon photonics

Compact Inversely-Designed Vertical Coupler with Bottom Reflector for Sub-Decibel Fiber-to-Chip Coupling on Silicon-on-Insulator Platform

Broadband and Low-Loss Metamaterial Silicon Nitride Edge Coupler

Multilayer Silicon Nitride Based Coupler Integrated into a Silicon Photonics Platform with 0.5 dB Coupling Loss between Standard SMF and the As-Diced Chip Edge Facet

High-efficiency edge couplers enabled by vertically tapering on lithium-niobate photonic chips

High-efficiency Apodized-Imaging Chip-Fiber Grating Coupler for Silicon Nitride Waveguides