Abstract:Edge coupler is a key component of silicon-based optoelectronic chips, which dramatically reduces the coupling loss between fibers and transmission waveguides. Here, we propose an ultralow-loss three-step silicon edge coupler based on a 130 nm CMOS process. By replacing the silicon substrate with a material with a lower refractive index than silicon oxide, the silicon leakage loss and polarization-dependent loss can be significantly improved. This structure avoids the existence of a cantilever, which enhances the mechanical strength of the edge coupler. Coupling with standard single-mode fiber, the simulation results demonstrate that the TE/TM mode has an ultralow loss of 0.63/1.08 dB at 1310 nm and 0.57/1.34 dB at 1550 nm, and the 0.5 dB bandwidth covering the entire communication band is about 400 nm. In the entire communication band, the polarization-dependent loss is less than 0.8 dB. Furthermore, we propose a taper shape design method based on mode analysis, which can be adapted for any taper to improve its compactness. Compared with the parabolic shape, the coupling loss of the edge coupler with a length of 460 μm for the TE mode is improved by 0.3 dB on average, this edge coupler provides a feasible solution for fiber-to-chip coupling and is perfectly suitable for wavelength division multiplexing applications in optical communications.

A low-loss, compact, broadband, polarization insensitive edge coupler for silicon photonics

CMOS-Compatible Ultralow-Loss Three-Step Silicon Edge Coupler with Substrate Substitution in the Whole Communication Band

Broad-band Efficient Edge Couplers for Compact Silicon Photonic Circuits

Broadband Polarization-Independent Directional Coupler Using Asymmetric-Waveguides

Compact broadband silicon 3 dB coupler based on shortcuts to adiabaticity.

Compact and Low-Loss 1 × 3 Polarization-Insensitive Optical Power Splitter Using Cascaded Tapered Silicon Waveguides

Broadband Polarization-Independent Edge Couplers With High Efficiency Based on SiN-Si Dual-Stage Structure

Low-loss and high stability standard single mode fiber edge couplers for silicon photonics

A Compact Adiabatic Silicon Photonic Edge Coupler Based on Silicon Nitride/Silicon Trident Structure

Compact and efficient coupler to interface hybrid dielectric-loaded plasmonic waveguide with silicon photonic slab waveguide

Demonstration of a low loss, highly stable and re-useable edge coupler for high heralding efficiency and low g^(2) (0) SOI correlated photon pair sources

Low Polarization-Dependent-loss Silicon Photonic Trident Edge Coupler Fabricated by 248 Nm Optical Lithography

High-efficiency edge couplers enabled by vertically tapering on lithium-niobate photonic chips

Ultra-compact and Low-Loss Silicon Polarization Beam Splitter Using a Particle-Swarm-optimized Counter-Tapered Coupler.

Ultralow-loss polarization-insensitive silicon nitride-assisted double-etched silicon edge coupler with polarization splitting

Compact Inversely-Designed Vertical Coupler with Bottom Reflector for Sub-Decibel Fiber-to-Chip Coupling on Silicon-on-Insulator Platform

High-efficiency Wideband SiNx-on-SOI Grating Coupler with Low Fabrication Complexity.

High-efficiency Grating Coupler Based on Fast Directional Optimization and Robust Layout Strategy in 130 Nm CMOS Process.

High Efficiency Silicon Edge Coupler Based on Uniform Arrayed Waveguides with Un-Patterned Cladding

Silicon Photonic Polarization Insensitive Filter with Low Polarization Dependent Extinction Radio

Broadband Coupler Between Silicon Waveguide and Hybrid Plasmonic Waveguide