Abstract:Edge coupler is a key component of silicon-based optoelectronic chips, which dramatically reduces the coupling loss between fibers and transmission waveguides. Here, we propose an ultralow-loss three-step silicon edge coupler based on a 130 nm CMOS process. By replacing the silicon substrate with a material with a lower refractive index than silicon oxide, the silicon leakage loss and polarization-dependent loss can be significantly improved. This structure avoids the existence of a cantilever, which enhances the mechanical strength of the edge coupler. Coupling with standard single-mode fiber, the simulation results demonstrate that the TE/TM mode has an ultralow loss of 0.63/1.08 dB at 1310 nm and 0.57/1.34 dB at 1550 nm, and the 0.5 dB bandwidth covering the entire communication band is about 400 nm. In the entire communication band, the polarization-dependent loss is less than 0.8 dB. Furthermore, we propose a taper shape design method based on mode analysis, which can be adapted for any taper to improve its compactness. Compared with the parabolic shape, the coupling loss of the edge coupler with a length of 460 μm for the TE mode is improved by 0.3 dB on average, this edge coupler provides a feasible solution for fiber-to-chip coupling and is perfectly suitable for wavelength division multiplexing applications in optical communications.

Ultralow-loss polarization-insensitive silicon nitride-assisted double-etched silicon edge coupler with polarization splitting

Broadband Polarization-Independent Directional Coupler Using Asymmetric-Waveguides

CMOS-Compatible Ultralow-Loss Three-Step Silicon Edge Coupler with Substrate Substitution in the Whole Communication Band

An Ultra-Broadband Polarizing Beam Splitter/coupler Using Asymmetric-Waveguides

Broadband Polarization-Independent Edge Couplers With High Efficiency Based on SiN-Si Dual-Stage Structure

Efficient and Polarization Insensitive Edge Coupler Based on Cascaded Vertical Waveguide Tapers.

A low-loss, compact, broadband, polarization insensitive edge coupler for silicon photonics

Broad-band Efficient Edge Couplers for Compact Silicon Photonic Circuits

Ultracompact polarization beam splitter based on a silicon-nitride-assisted three-waveguide coupler

Low-Loss Silica Edge Coupler Based on Cascaded Gratings With Multiple Duty Ratios

Low Polarization-Dependent-loss Silicon Photonic Trident Edge Coupler Fabricated by 248 Nm Optical Lithography

Cmos-Compatible High Efficiency Polarization Splitting Grating Coupler Near 1310Nm

Low Loss, Large Bandwidth Fiber-Chip Edge Couplers Based on Silicon-on-Insulator Platform

Dual-layer Polarization Beam Splitting Grating Coupler with Low Polarization Dependent Loss

Ultra-compact and Low-Loss Silicon Polarization Beam Splitter Using a Particle-Swarm-optimized Counter-Tapered Coupler.

Broadband and easily fabricated double-tip edge coupler based on thin-film lithium niobate platform

Broadband and Low-Loss Metamaterial Silicon Nitride Edge Coupler

Broadband and High-Performance Devices for the Silicon and Silicon-Nitride Platforms

High Efficiency Silicon Edge Coupler Based on Uniform Arrayed Waveguides with Un-Patterned Cladding

Polarization-insensitive and high-efficiency edge coupler for thin-film lithium niobate

Polarization-insensitive EDG demultiplexer combined with a polarization beam splitter.