Multiplexed Microfluidic Chip Based Flow Injection Analysis System for Simultaneous Determination of Fe(Iii), Mn(Ii) and Cu(Ii)
Fang Li,Nuotong Shen,Qingcheng Li,Chen Yang,Limin Zhang,Mingjin Wang
DOI: https://doi.org/10.1016/j.microc.2024.112346
IF: 5.304
2024-01-01
Microchemical Journal
Abstract:The development of microfluidic flow injection analysis (FIA) system for simultaneous and real-time detection of multiple metal ions is of great importance for environmental monitoring, food safety and industrial field. In this work, a multiplexed microfluidic chip based FIA system was fabricated for simultaneous determination of three metal ions, by using Fe(III), Mn(II) and Cu(II) as models. The multiplexed microfluidic chip based FIA system is composed of three parts, including a multi-channel FIA system for solution manipulation, a group of microfluidic chips for reagents mixing and reaction, and one fiber optic spectrometer for fast and real-time absorbance signal detection. The sample solution and chromogenic reagents were injected into the microfluidic chips to carry out specific colorimetric reactions. Fe(III), Mn(II) and Cu(II) reacts with 5-sulfosalicylic acid, formaldoxime, and bis(cyclohexanone) oxalyldihydrazone, respectively, to generate orange, ember and blue colored solution with peak absorbance at 420 nm, 450 nm, and 600 nm, respectively. The absorbance signal of the generated three channels of solution can be sequentially detected by using only one mini spectrometer. The linear detection range for Fe(III), Mn(II) and Cu(II) is 0.1–20 mg/L, 0.1–12 mg/L and 0.2–12 mg/L, respectively. The limit of detection for Fe(III), Mn(II) and Cu(II) is 0.07, 0.02 and 0.1 mg/L respectively. And the limit of quantification for Fe(III), Mn(II) and Cu(II) is 0.2, 0.07 and 0.3 mg/L, respectively. The recoveries of spiked Fe (III), Mn (II), and Cu (II) in real water samples are between 95.3 % to 106 %. Finally, the developed microfluidic chip based FIA system was successfully applied to simultaneous determination of three metal ions in environmental water samples and zinc smelting solution from zinc hydrometallurgy industry with satisfied results.