Abstract:A sensitive and automated method for underway and onboard analysis of trace ammonium in seawater was established using on-line solid phase extraction and fluorescence detection. Ammonium reacted with o-phthalaldehyde and sulfite to produce isoindole derivative that was concentrated on a hydrophilic lipophilic balanced (HLB) cartridge and then rapidly eluted with ethanol and measured using a fluorescence detector. The work was modified from our previous developed method, where 30 mL of a seawater sample was introduced into a reaction bottle with a 10 mL pipette. In the modified method a 10 mL sample loop was adopted for sample introduction to reduce possible contamination caused by manual operation. More importantly, the present method makes underway monitoring much more automatic. The detection limit was 3.5 nmol L-1, and the relative standard deviation was 3.52% (n = 12) for a sample spiked with 40 nmol L-1 ammonium standard. The method was free of the effects of salinity, carry-over and dissolved organic matter, with recoveries between 94.0% and 106.1%. An equation was introduced to correct matrix effects, and pure water and seawater blank were found to be equivalent to ammonium concentration of 8.1 +/- 2.2 nmol L-1 and 6.0 +/- 0.8 nmol L-1, respectively. The correction method can also be introduced to determination of other trace analytes where matrix effect cannot be neglected. A technique of stopped-flow was adopted and stopped-flow time could be adjusted depending on the concentration of ammonium in the seawater samples. The sample throughput was 7-9 h-1, and the method permitted the analysis of samples over a wide range of concentrations. The modified method has been successfully applied for shipboard underway determination of ammonium in a coastal area and shipboard determination the ammonium concentration of discrete samples in three vertical profiles during a cruise in the South

A sensitive flow-injection analysis method with iminodiacetate chelation and spectrophotometric detection for on board determination of trace dissolved aluminum in seawater

In-situ auto-analysis technique of trace heavy metal in seawater

Determination of Aluminum in Natural Waters by Flow Injection Analysis with Spectrophotometric Detection

A Sensitive Flow-Batch System for on Board Determination of Ultra-Trace Ammonium in Seawater: Method Development and Shipboard Application.

Flow Injection Analysis Method with On-Line Resin Separation for Determining Trace Fe(II) and Fe(II + III) Using Catalytic Spectrophotometry

Development and Application of a Shipboard Method for Spectrophotometric Determination of Trace Dissolved Manganese in Estuarine and Coastal Waters

Shipboard determination of arsenite and total dissolved inorganic arsenic in estuarine and coastal waters with an automated on-site-applicable atomic fluorescence spectrometer

A Modified Method of On-Line Solid Phase Extraction and Fluorometric Detection for Underway Monitoring and Onboard Analysis of Trace Ammonium in Seawater

Development and Application of a Shipboard Method for Spectrophotometric Determination of Nanomolar Dissolved Sulfide in Estuarine Surface Waters Using Reverse Flow Injection Analysis Coupled with a Long Path Length Liquid Waveguide Capillary Cell

Flow-injection column preconcentration directly coupled with electrothermal atomization atomic absorption spectrometry for the determination of aluminium. Comparison of column packing materials

Determination of aluminum in sediments by atomic absorption spectrophotometer without FIA spectrophotometric analysis]

In-field Determination of Trace Dissolved Manganese in Estuarine and Coastal Waters with Automatic On-Line Preconcentration and Flame Atomic Fluorescence Spectrometry.

Determination of Trace Soluble Heavy Metals in Seawater Based on Flow Injection Analysis and Spectrophotometry

A Shipboard Method for Catalytic Kinetic Spectrophotometric Determination of Trace Cu(II) Concentrations in Seawater Using Reverse Flow Injection Analysis Coupled with a Long Path Length Liquid Waveguide Capillary Cell

An Efficient Flow-Injection System with On-Line Ion-Exchange Preconcentration for the Determination of Trace Amounts of Heavy Metals by Atomic Absorption Spectrometry

A flow injection knotted reactor suction elution method coupled with flame atomic absorption spectrometry for the determination of trace lead and zinc in water

High-frequency Underway Analysis of Ammonium in Coastal Waters Using an Integrated Syringe-Pump-based Environmental-Water Analyzer (Isea)

Flow-injection analysis with fluorescence detection for the determination of trace levels of ammonium in seawater

Rapid Determination of Soluble Reactive Silicate in Seawater by Flow Injection Analysis with Spectrophotometric Detection and Its Application

A Modified Method for On-Line Determination of Trace Ammonium in Seawater with a Long-Path Liquid Waveguide Capillary Cell and Spectrophotometric Detection

Flow injection-spectrophotometry analysis of manganese in seawater samples