Abstract:Polytetrafluoroethylene (PTFE) fiber was demonstrated as a new sorbent for flow injection on-line sorption preconcentration of trace elements. The on-line PTFE fiber packed microcolumn preconcentration system was coupled with hydride generation atomic fluorescence spectrometry (HG-AFS) for the determination of (ultra)trace selenite (Se(IV)) in natural water. Selective determination of Se(IV) in aqueous solution was achieved by on-line formation of Se(IV)-pyrrolidinedithiocarbamate (PDC) complex over a wide sample acidity range of 0.01-50% v/v HCl, its sorption onto the surface of the PTFE fiber in the microcolumn, elution with 3% m/v kBH(4) in 0.5% m/v KOH, hydride generation with 15% v/v HCl solution and determination with atomic fluorescence spectrometry. The alkaline KBH4 solution was employed not only as an efficient eluent but also as the reductant to produce selenide anion for subsequent hydride generation. With a consumption of 12.4 ml of sample solution, a detection limit (3sigma) of 4 ng l(-1) was achieved at a sample throughput of 26 samples h(-1). The retention efficiency was 67%, being five times that obtained with a PTFE knotted reactor (KR). The linear ranges of the diagrams of signal intensity against sample loading flow rate, and sample loading time, were much wider than those achieved with a KR, offering more potential for obtaining high sensitivity by increasing sample loading rates and/or sample loading time. The precision for 11 replicate measurements of 0.5 mug l(-1) Se(IV) was 1.5% (RSD). The recoveries of Se(IV) from natural water samples varied from 96 to 108%. The concentration of Se(IV) in a certified reference material (NASS-5, sea-water) determined by the present method with a simple aqueous standard curve calibration was in good agreement with the certified value. The developed method was also successfully applied to the detection of Se(IV) in local river water, lake water and sea-water samples.

Determination of Copper in Water and Rice Samples by Flame Atomic-Absorption Spectrometry with Flow-Injection Online Adsorption Preconcentration Using A Knotted Reactor

Determination of Cadmium in Biological-Materials by Flame Atomic-Absorption Spectrometry with Flow-Injection Online Sorption Preconcentration

Determination of Cadmium, Lead and Copper in Water Samples by Flame Atomic-Absorption Spectrometry with Preconcentration by Flow-Injection On-Line Sorbent Extraction.

Determination of trace copper and nickel in environmental and biological samples by flow injection on-line microcolumn preconcentration flame AAS using acrylic acid-grafted polytetrafluoroethylene fiber for column packing

An Efficient Flow-Injection System with On-Line Ion-Exchange Preconcentration for the Determination of Trace Amounts of Heavy Metals by Atomic Absorption Spectrometry

Copper Determination by Flow Injection On-Line Sorbent Preconcentration Coupled with Flame Atomic Absorption Spectrometry Using 1,10 Phenanthroline

THE DETERMINATION OF TRACE AMOUNTS OF HEAVY-METALS IN WATERS BY A FLOW-INJECTION SYSTEM INCLUDING ION-EXCHANGE PRECONCENTRATION AND FLAME ATOMIC-ABSORPTION SPECTROMETRIC DETECTION

PRECONCENTRATION OF TRACE COPPER IN WATER SAMPLES WITH FI-SOLVENT EXTRACTION AND AAS

A Simple and Sensitive Flow-Injection On-line Preconcentration Coupled with Hydride Generation Atomic Fluorescence Spectrometry for the Determination of Ultra-trace Lead in Water, Wine, and Rice

Determination of Ni, Cu and Hg by flow injection preconcentration coupled with HPLC

Determination of trace cobalt, nickel and cadmium by on-line flow injection analysis with coprecipitation preconcentration FAAS

Flow injection on-line sorption preconcentration coupled with hydride generation atomic fluorescence spectrometry for determination of (ultra)trace amounts of arsenic(III) and arsenic(V) in natural water samples

Determination of Iron( II ) and Total Iron Using Flow Injection On-line Preconcentration with FAAS

Determination of Trace Amounts of Copper by Flow Injection Vapor Generation AAS

High Efficiency Low Sample Consumption On-Line Ion-Exchange Pre-Concentration System for Flow Injection Flame Atomic Absorption Spectrometry

ONLINE ELECTROLYTIC DISSOLUTION OF SOLID METAL SAMPLES AND DETERMINATION OF COPPER IN ALUMINUM-ALLOYS BY FLAME ATOMIC-ABSORPTION SPECTROMETRY

Flow Injection On-Line Coprecipitation Preconcentration for Electrothermal Atomic Absorption Spectrometry

Dispersive Liquid–Liquid Microextraction and Micro-Solid Phase Extraction for the Rapid Determination of Metals in Food and Environmental Waters

Flow injection on-line preconcentration and flame atomic absorption spectrometric determination of iron, cobalt, nickel, manganese and zinc in sea-water

Determination of Cu2+ Using Poly(2-aminothiazole)/Multi-Walled Carbon Nanotubes Composite Film Modified Glassy Carbon Electrodes

Flow Injection On-Line Sorption Preconcentration Coupled with Hydride Generation Atomic Fluorescence Spectrometry Using A Polytetrafluoroethylene Fiber-Packed Microcolumn for Determination of Se(Iv) in Natural Water