Abstract:The effects of combined addition of Sn and Y on the microstructure, texture, and mechanical properties of as extruded Mg-5Li-3Al-2Zn alloy were investigated. The results show that the microstructure of as-extruded Mg5Li-3Al-2Zn alloy mainly consists of alpha-Mg and AlLi phases. With the addition of Sn and Y, Mg2Sn and Al2Y compounds form, while AlLi phase gradually disappears with increasing Y content. These second phases are crushed into smaller particles during hot extrusion process, and Al2Zn particles are found in Mg2Sn-rich regions and distribute along the grain boundaries. Meanwhile, the microstructure is significantly refined, and the combined addition of 0.8 wt% Sn and 1.2 wt% Y produces the smallest grain size of 4.78 mu m and the uniform microstructure is entirely composed of equiaxed grains. Additionally, the addition of Sn and Y weakens the basal texture of as-extruded alloy and introduces recrystallization texture due to solute drag effect and dynamic re crystallization. As-extruded Mg-5Li-3Al-2Zn-0.8Sn-1.2Y alloy exhibits a superior combination of tensile properties with ultimate tensile strength and elongation of 328.0 MPa and 25.1%, which are increased by approximately 32.2% and 41.0% compared with those of as-extruded Mg-5Li-3Al-2Zn alloy (248.2 MPa and 17.8%), respectively. The improvement of mechanical properties is mainly attributed to solution, dispersion, and grain refinement strengthening.

Microstructural Evolution, Mechanical Properties and Corrosion Behavior of As-Cast Mg-5Li-3Al-2Zn Alloy with Different Sn and Y Addition

Microstructure and Corrosion Behavior of As-Extruded Mg-6.5Li-xY-yZn Alloys

Effect of Sn Addition on Microstructure and Corrosion Behavior of As-Extruded Mg–5Zn–4Al Alloy

Effects of Sn and Y on the Microstructure, Texture, and Mechanical Properties of As-Extruded Mg-5Li-3Al-2Zn Alloy

Microstructure and Mechanical Properties of As-Cast Mg-Sn-Zn-Y Alloys

The Microstructure and Mechanical Properties of As-cast Mg-10Gd-3Y-xZn-0.6Zr (x=0, 0.5, 1 and 2 Wt%) Alloys

Microstructure and Corrosion Behavior of As-Homogenized Mg-xLi-3Al-2Zn-0.2Zr Alloys (x=5, 8, 11 Wt%)

Influence of Yttrium Addition on the Corrosion Behaviour of As-Cast Mg–8Li–3Al–2Zn Alloy

Microstructure, Mechanical and Corrosion Properties of Mg-4Al-2Sn-xY-0.4Mn Alloys

Effect of Sn and Y Addition on the Microstructural Evolution and Mechanical Properties of Hot-Extruded Mg-9Li-3Al Alloy

Effect of Sn Addition on the Microstructure and Corrosion Behavior of Dilute Wrought Mg-Zn-Ca Series Alloys

Microstructure and Properties of As-cast Mg-xSn-2La Alloy

Microstructure, Tensile Properties, and Corrosion Behavior of Die-Cast Mg-7Al-1Ca- X Sn Alloys

Improvement of Mechanical Properties and Corrosion Resistance of As‐Extruded Mg–2Zn–2Al–0.3Mn Alloy Through Y Addition

Effect of Combined Addition of La and Sm on Mechanical Properties, Microstructure Evolution, and Electrochemical Behavior of Mg-3Zn-1Mn/Sn-0.5Ca Alloy

Effect of Y content on microstructure and mechanical properties of as-cast Mg–8Li–3Al–2Zn alloy with duplex structure

EFFECTS OF Sn ON MICROSTRUCTURES AND CORROSION RESISTANCE OF Mg-6Al-1.2Y-0.9Nd MAGNESIUM ALLOY

Microstructure and corrosion behavior of as-homogenized and as-extruded Mg−xLi−3Al−2Zn−0.5Y alloys (x=4, 8, 12)

Effect of Microstructure on the Corrosion Behavior of as-cast and Extruded Mg–Sn–Y Alloys

Microstructure and Mechanical Properties of As-Cast and Solid Solution Treated Mg−8Li−xAl−yZn Alloys

Effects of SnO 2 Passive Film and Surface Micro-Galvanic Corrosion on the Corrosion Behavior of as-Extruded Mg-9Li-5Al-xSn Alloys