Abstract:Tantalum silicate (Ta–Si–O) thin film materials have gained significant interest in hybrid renewable energy systems and thin-film resistors due to their exceptional thermal stability and adjustable electrical properties. In this study, we investigated the effects of target compositions and sputtering power densities on the material structures, chemical compositions, microstructures, and electrical properties of Ta–Si–O films. Two target compositions, Ta 65 (SiO 2 ) 35 and Ta 80 (SiO 2 ) 20 , were utilized in the deposition process. Notably, we observed substantial variations in the temperature coefficient of resistance (TCR) value and resistivity of Ta–Si–O thin films with different Ta concentrations. Most importantly, when the Ta content of the film is controlled at 62 ± 0.6 % by using this target, the resistivity of the Ta 0.62 Si 0.20 O 0.18 film can be as small as 2.31 ± 0.05 × 10 −4 Ω-cm and has an extremely small TCR of 22 ± 0.4 ppm/°C, which shows an excellent opportunity for the development of precision thin film resistors. A TCR value close to zero can be finely tuned by controlling the Ta concentration in the Ta–Si–O film. These intriguing electrical behaviors were found to be highly correlated with the predominant formation of metallic Ta 5 Si 3 as the main structural phase in the films. This work presents a simple and effective approach to produce Ta–Si–O thin films with near-zero TCR, making them highly suitable for applications under high-temperature conditions. Our findings contribute to the development of tailored thin film materials with desirable electrical properties for advanced electronic and energy devices.

Deposition of tantalum nitride films as the absorption load resistor for microwave power standard chips

Structural and electrical properties of tantalum nitride thin films fabricated by using reactive radio-frequency magnetron sputtering

Design and Fabrication of DC-18GHz Microwave Power Thin Film Resistors

Tantalum Nitride Thin Film with a Nearly Zero Temperature Coefficient of Resistance Synthesized by Magnetron Co-Sputtering

Effect of Nitrogen Flow Ratio on Degradation Behaviors and Failure of Magnetron Sputter Deposited Tantalum Nitride

Microwave characterization of tantalum superconducting resonators on silicon substrate with niobium buffer layer

Microstructure and Thermal Diffusivity Investigations of RF-Sputtered Tantalum Nitride Films

Integration of microwave termination based on TaN thin films on ferrite substrates

Reactive sputter deposition and properties of TaxN thin films

Microstructure and Mechanical Properties of TaN Thin Films Prepared by Reactive Magnetron Sputtering

Effects of nitrogen composition on the resistivity of reactively sputtered TaN thin films

A Heating and Diffusion Barrier Based on TaSiNx for Miniaturized IC Devices

Studies of BaO-Nd2O3-TiO3 Thin Films by RF Sputter and Its TMLs

TaN Diffusion Barrier Layers Deposited by Reactive Magnetron Sputtering

Characteristics of Tantalum Oxynitride Films Prepared by Rf Magnetron Sputtering

Performance of RF Sputtering Deposited TaN as the Diffusion Barrier of Cu Interconnection

Fabrication of tantalum silicate films with low TCR and low resistivity by magnetron sputtering

Influence of room-temperature oxidation on stability and performance of reactively sputtered TaN thin films for high-precision sheet resistors

Biomedical Properties of Tantalum Nitride Films Synthesized by Reactive Magnetron Sputtering

Fabrication of superconducting tantalum nitride thin films using infra-red pulsed laser deposition