Abstract:MgNi-based alloys have been regarded as very promising anode material for nickel-metal hydride battery owing to their electrochemcial capacity much higher than that of AB(5) alloys. However, Mg-Ni alloy anodes generally suffer very serious capacity decay in cycling, which is previously ascribed to the corrosion of Mg in alkali electrolyte in the past decades. To further reveal the capacity fading mechanism of MgNi-based alloys, the electrochemcial hydrogen storage properties of Mg2Ni and amorphous Mg50Ni50 alloys and their microstructural evolution during cycling were comparatively studied. It has been firstly demonstrated that it is the amorphous MgNi phase instead of Mg2Ni phase contributes to electrochemical discharge capacity, because the Mg2NiH4 hardly released hydrogen under electrochemcial conditions. Then, it has been found that the charge input level has significant effect on the cyclic performance of amorphous Mg50Ni50 alloy anode. At full charge of 500 mAh g(-1), the amorphous MgNi phase easily crystallized to the nanocrystalline Mg2NiH4, which leaded to the capacity decay immediately. Comparatively, with the low charge input of 100 mAh g(-1), the discharge capacity of amorphous Mg50Ni50 alloy remained almost unchanged for 425 cycles. The excellent cyclability is attributed to the less hydrogenation-induced crystallization at low charge input. This work clearly demonstrates that the hydrogenation-induced crystallization is a dominating reason for the electrochemical capacity decay in the milled amorphous Mg-Ni anode. It provides a new approach to improve the electrochemcial properties of Mg-Ni alloy electrode by inhibiting the hydrogenation-induced crystallization. (C) 2019 Elsevier Ltd. All rights reserved.

Electrochemical characteristics and mechanism of capacity loss of amorphous Mg-Ni based alloys prepared by high energy ball milling

Electrochemical properties of amorphous Mg–Fe alloys mixed with Ni prepared by ball-milling

An electrochemical investigation of mechanical alloying of MgNi-based hydrogen storage alloys

The Electrochemical Evaluation of Ball Milled MgNi-based Hydrogen Storage Alloys

Microstructure and electrochemical properties of amorphous Mg-Fe-Ni hydrogen storage electrode material

Microstructure and electrochemical properties of amorphous composites of ball-milled Mg2Ni0.95Sn0.05 + x wt% Ni

Microstructures and electrochemical hydrogen storage properties of novel Mg–Al–Ni amorphous composites

Hydrogenation and Crystallization of Amorphous Phase: A New Mechanism for the Electrochemical Capacity and Its Decay in Milled Mg-Ni Alloys

The Relation Between the Discharge Capacity and Cycling Number of Mechanically Alloyed MgxNi100−x Amorphous Electrode Alloys

Electrochemical Properties of Cemg12+X%Ni Composites (X=0 Similar to 200) Prepared by Ball-Milling

Mechanical Ball Milling Preparation and Electrochemical Hydrogen Storage Properties of Amorphous Mg-Fe Composites

Influence of Ball-milling with Ni Powder on the Phase Structure and Electrochemical Hydrogen Storage Properties of Mg17Al12 Alloy

Enhanced Electrochemical Performance of Mg2ni Alloy Prepared by Rapid Quenching in Magnetic Field

A study of the degradation of the electrochemical capacity of amorphous Mg50Ni50 alloy

Preparations and Electrochemical Properties of Amorphous Ti-Al Alloys

Amorphization and Electrochemical Hydrogen Storage Properties of Mechanically Alloyed Mg–Ni

Electrochemical Performance of the Ball-Milled La2Mg14−xTixNi3 Alloys with Ni Powders (x=1 and 2)

Microstructural Transformation And Electrochemical Properties Of Mg-Ni-Y-La Amorphous Alloy

Effects of Surface Modification on the Electrode Behavior of Amorphous CeMg12 Alloys

Electrical cycling characteristics of high-entropy energy storage Mg-Y-Ni-Cu alloys with different degrees of amorphization for Ni-MH batteries

Effect of ball-milling time on the electrochemical performance of ball-milled LaMg11Ni+200wt% Ni composite