Abstract:MgNi-based alloys have been regarded as very promising anode material for nickel-metal hydride battery owing to their electrochemcial capacity much higher than that of AB(5) alloys. However, Mg-Ni alloy anodes generally suffer very serious capacity decay in cycling, which is previously ascribed to the corrosion of Mg in alkali electrolyte in the past decades. To further reveal the capacity fading mechanism of MgNi-based alloys, the electrochemcial hydrogen storage properties of Mg2Ni and amorphous Mg50Ni50 alloys and their microstructural evolution during cycling were comparatively studied. It has been firstly demonstrated that it is the amorphous MgNi phase instead of Mg2Ni phase contributes to electrochemical discharge capacity, because the Mg2NiH4 hardly released hydrogen under electrochemcial conditions. Then, it has been found that the charge input level has significant effect on the cyclic performance of amorphous Mg50Ni50 alloy anode. At full charge of 500 mAh g(-1), the amorphous MgNi phase easily crystallized to the nanocrystalline Mg2NiH4, which leaded to the capacity decay immediately. Comparatively, with the low charge input of 100 mAh g(-1), the discharge capacity of amorphous Mg50Ni50 alloy remained almost unchanged for 425 cycles. The excellent cyclability is attributed to the less hydrogenation-induced crystallization at low charge input. This work clearly demonstrates that the hydrogenation-induced crystallization is a dominating reason for the electrochemical capacity decay in the milled amorphous Mg-Ni anode. It provides a new approach to improve the electrochemcial properties of Mg-Ni alloy electrode by inhibiting the hydrogenation-induced crystallization. (C) 2019 Elsevier Ltd. All rights reserved.

Microstructural Transformation And Electrochemical Properties Of Mg-Ni-Y-La Amorphous Alloy

Microstructural Investigation and Electrochemical Property of Mg63Ni27Nd10 Amorphous Alloy

Microstructural Investigation of Electrochemical Hydrogen Storage in Amorphous Mg–Ni–La Alloy

Electrode Properties and the Dehydrogenation Process of Amorphous Mg–Ni–La Alloys

An electrochemical investigation of mechanical alloying of MgNi-based hydrogen storage alloys

Microstructures and electrochemical hydrogen storage properties of novel Mg–Al–Ni amorphous composites

Microstructure and electrochemical properties of amorphous Mg-Fe-Ni hydrogen storage electrode material

Influence of Annealing Treatment on Microstructure and Cycling Stability of La-Rich Ml(Nicomnal)(5) Alloy Electrode for Ni/Mh Batteries

Amorphization and Electrochemical Hydrogen Storage Properties of Mechanically Alloyed Mg–Ni

Microstructure and electrochemical properties of amorphous composites of ball-milled Mg2Ni0.95Sn0.05 + x wt% Ni

The Dehydrogenation Process of Amorphous (mg60ni25)92la8 Alloy

Electrochemical properties of amorphous Mg–Fe alloys mixed with Ni prepared by ball-milling

Hydrogenation and Crystallization of Amorphous Phase: A New Mechanism for the Electrochemical Capacity and Its Decay in Milled Mg-Ni Alloys

Influences of annealing treatment on electrochemical properties of La-Mg-Ni-Co hydrogen storage alloy

Electrode properties of melt-spun Mg–Ni–Nd amorphous alloys

The Electrochemical Evaluation of Ball Milled MgNi-based Hydrogen Storage Alloys

Properties of Amorphous Mg 65 Ni 10 RE 25 (re=la, Ce, Pr, Nd, Mm) Hydrogen Storage Alloys Electrode

Preparations and Electrochemical Properties of Amorphous Ti-Al Alloys

Thermal Stability and Electrode Properties of Melt-Spun Mg65cu25nd10 Amorphous Alloy

The Relation Between the Discharge Capacity and Cycling Number of Mechanically Alloyed MgxNi100−x Amorphous Electrode Alloys

PHASE STRUCTURE AND ELECTROCHEMICAL PROPERTIES OF La-Mg-Ni SYSTEM AB_3 TYPE HYDROGEN STORAGE ELECTRODE ALLOYS