PHASE STRUCTURE AND ELECTROCHEMICAL PROPERTIES OF La-Mg-Ni SYSTEM AB_3 TYPE HYDROGEN STORAGE ELECTRODE ALLOYS

B Liao,Yq Lei,Gl Lu,Lx Chen,Hw Ge,Hg Pan
DOI: https://doi.org/10.3321/j.issn:0412-1961.2005.01.009
IF: 1.797
2005-01-01
ACTA METALLURGICA SINICA
Abstract:XRD Rietveld analysis shows that LaxMg3-xNi9(x=1.0-2.3) alloys consist of a main phase with hexagonal PuNi3-type structure and a few impurity phases (mainly LaNi5 and MgNi2), increasing x leads to an increase in both the lattice parameters and the unit cell volume of the main phase. The hydride of the alloys preserves the PuNi3 type structure, but shows a large unit cell volume expansion. The electrochemical measures indicate that the desorption plateau pressure (Peq) of the alloys decreases noticeably as x increases, while the maximum discharge capacity (Cmax) increases from 88.3 (x=1.0) to 397.5 (x=2.0), and then decreases to 230 mA·h/g (x=2.3). For the alloys with Cmax 348 mA·h/g (x=1.7-2.2), the high-rate dischargeability (HRD) of the electrodes at i=400-1200 mA/g decreases with increaseing x. The slower decrease of HRD is mainly attributed to the decrease of eletrocatalytic activity due to the charge-transfer reaction, and the more rapid decrease of HRD of the alloys with x 2.0 is related to the lower hydrogen diffusion rate in the bulk of alloy. The rate of capacity retention (S100) of the alloys after 100 charge/ discharge cycles is around 55.7%-62.9%, the rather fast cycling capacity degradation is mainly due to the corrosion of La and Mg and the large unit cell volume expansion in the hydride phase.
What problem does this paper attempt to address?