Abstract:Using an inert, immiscible organic component as the purging gas is an innovative technology in the CO2 stripping process. It allows stripping at a lower temperature and overcomes the inherent problem of high energy consumption in steam-based CO2 stripping processes. This work focused on developing a novel, direct non-aqueous gas stripping process and exploiting its potential for energy saving through experiments. An elaborate pre-screening of carrier gases was conducted through hydrocarbon, alcohols, aldehydes, ketones, and their isomers, etc. Pentane, hexane, and cyclohexane were selected as the carrier candidates for their good immiscibility with water/amine, low vaporization energy, mild condensation conditions, and low toxicity. The effects of carrier gas category, carrier gas flow rate, and rich solvent feeding temperature on the stripping performance were investigated. Pentane was found to be the superior carrier gas due to its low heat of vaporization, high regeneration rate, and low energy requirement. A unique phenomenon of water evaporation from the solvent was discovered in the organic gas stripping process, providing a promising approach to break the gas-liquid interface for enhanced diffusion kinetics. The feasibility of low temperature CO2 stripping was analyzed by varying the rich solvent feeding temperature (70-100 degrees C). With pentane as the stripping gas, it was interesting to find an optimum rich feed temperature lower than 90 degrees C, indicating great potential for a reduction in the overall energy requirement. Under the optimal conditions, the energy consumption during CO2 regeneration, using pentane as the carrier gas, was 2.38 Gift CO2, 38.8% lower than that of the conventional stripping process. Furthermore, parasitic issues, such as water loss and solvent loss, were discussed. An improved direct non-aqueous gas stripping process with two-stage compression was used to tackle the carrier gas recovery problem. The simulation results show that more than 98% of the carrier gas can be recovered through preliminary separation approaches. (C) 2017 Elsevier Ltd. All rights reserved.

Experimental Study on the Novel Direct Steam Stripping Process for Postcombustion Co2 Capture

Novel Solvent Regeneration Process Through Direct Steam Stripping

Solvent Regeneration by Novel Direct Non-Aqueous Gas Stripping Process for Post-Combustion CO2 Capture

Process Simulations of CO2 Desorption in the Interaction between the Novel Direct Steam Stripping Process and Solvents

Process Simulations of the Direct Non-Aqueous Gas Stripping Process for CO2 Desorption

Energy-efficient Solvent Properties for the Post-combustion Carbon Dioxide Capture

Intrinsic Insight of Energy-Efficiency Optimization for CO2 Capture by Amine-Based Solvent: Effect of Mass Transfer and Solvent Regeneration

New Approach with Universal Applicability of Evaluating the Heat Requirements in Solvent Regeneration Process for Post-Combustion CO2 Capture

Comparative desorption energy consumption of post-combustion CO2 capture integrated with mechanical vapor recompression technology

Energy-efficient Process Intensification for Post-Combustion CO2 Capture: A Modeling Approach

Resolving the Contradiction Caused by Water-Lean Solvent Through a Split-Flow Heat Exchange Strategy Toward Efficient Carbon Dioxide Capture

Study on process intensification of pre combustion CO capture

Ionic Liquid-Ethanol Mixed Solvent Design for the Post-Combustion Carbon Capture

Modelling and Process Analysis of Post-Combustion Carbon Capture with the Blend of 2-Amino-2-methyl-1-propanol and Piperazine

Experimental Study of the Dynamic Behavior of the Stripping Column for Post-combustion CO2 Capture with Monoethanolamine

Determining the Performance of an Efficient Nonaqueous CO2 Capture Process at Desorption Temperatures below 373 K

Novel Postcombustion Capture Process for CO2 from the Flue Gas of Coal-Fired Power Plants Using a Green Deep Eutectic Solvent

Simulation and Optimization of Carbon Dioxide Capture Using Water-Lean Solvent from Industrial Flue Gas

Multi-stage Solvent Circulation Absorption Enhancement: System Optimization for Energy-Saving CO2 Capture

Superior energy-saving splitter in monoethanolamine-based biphasic solvents for CO2 capture from coal-fired flue gas

Experimental Study of the Absorption and Regeneration Performance of Several Candidate Solvents for Post-Combustion CO2 Capture