Abstract:Post-combustion carbon capture appears to be a promising solution to reduce the emission of carbon dioxide (CO 2 ) from power plants that generate electricity using either coal or natural gas. In addition, carbon capture process efficiency, capacity, and energy consumption have become challenging against the performance of the capture process. However, synergistic effect due to solvents blend has gained attention to reduce the process energy consumption and enhance process efficiency. In this study, blends of methyldiethanolamine (MDEA) and piperazine (PZ) at different concentrations were investigated using a validated post-combustion capture process model using Aspen HYSYS. Results were compared with 30 wt% monoethanolamine (MEA) as reference case. The effective process variables are concentration of solvents, the amount of water and solvent in the makeup section, viscosity of solvent, energy consumed in different process stages, and the amount of lean solvent flow rate. These variables were studied against fixed process variables using rate-based model. The study shows that using (43 wt% MDEA/7 wt% PZ) for post-combustion carbon capture needs 2.53 MJ/kg CO2 regeneration energy for 88.5% process efficiency compared to 4.003 MJ/kgco 2 for 30 wt% MEA without the need for any process modifications. In addition, it was found that solvents synergistic effect contributes to resolving the drawbacks of post-combustion capture that will enable the high utilization of the process and contribution to reduce the consequences effect of climate change. Therefore, the study will help policymakers, industries and encourage researchers towards the large-scale commissioning of blended solvent -based post-combustion capture process.

Study on process intensification of pre combustion CO capture

Process optimization of CO2membrane and cryogenic hybrid separation

Systematic Design and Optimization of a Membrane–Cryogenic Hybrid System for CO2 Capture

Research progress of pre-combustion CO2 capture

Energy-efficient Process Intensification for Post-Combustion CO2 Capture: A Modeling Approach

Influences Of Co2 Capture On Coal Water Slurry Igcc Performance

Experimental Study on Postcombustion Systems Including a Hollow Fiber Membrane and a Packed Column

Ammonia-based post-combustion CO2 and SO2 integrating capture using multi-stage solvent circulation process

Multistage Circulation Absorption Improvement: Simulation and Energy-Saving Evaluation of an Innovative Amine-Based CO2 Capture Process

Modelling and Process Analysis of Post-Combustion Carbon Capture with the Blend of 2-Amino-2-methyl-1-propanol and Piperazine

Development and testing of a new post-combustion CO2 capture solvent in pilot and demonstration plant

Post-combustion carbon capture process modeling, simulation, and assessment of synergistic effect of solvents

Experimental Study on Carbon Capture Performance of Polyimide Hollow Fiber Membrane in Post-combustion Process

Experimental Study on the Novel Direct Steam Stripping Process for Postcombustion Co2 Capture

Membrane CO2 Separation System Improvement for Coal-Fired Power Plant Integration

Optimization of solvent properties for post-combustion CO2 capture using process simulation

Integrated Capture and Conversion of CO2 to Methane using a Water-lean, Post-Combustion CO2 Capture Solvent.

Process and Integration Optimization of Post-Combustion CO2 Capture System in a Coal Power Plant

Performance study on mixed solvent for post‐combustion carbon capture using rotating packed bed technology

Assessment of Hybrid Solvent—Membrane Configurations for Post-Combustion CO2 Capture for Super-Critical Power Plants

System And Processes Of Pre-Combustion Carbon Dioxide Capture And Separation