Abstract:The capture of CO2 from concentrated emission sources as well as from air represents a process of paramount importance in view of the increasing CO2 concentration in the atmosphere and its associated negative consequences on the biosphere. Once captured using various technologies, CO2 is desorbed and compressed for either storage (carbon capture and storage (CCS)) or production of value-added products (carbon capture and utilization (CCU)). Among various products that can be synthesized from CO2, methanol and formic acid are of high interest because they can be used directly as fuels or to generate H2 on demand at low temperatures (<100 °C), making them attractive hydrogen carriers (12.6 and 4.4 wt % H2 in methanol and formic acid, respectively). Methanol is already produced in huge quantities worldwide (100 billion liters annually) and is also a raw material for many chemicals and products, including formaldehyde, dimethyl ether, light olefins, and gasoline. The production of methanol through chemical recycling of captured CO2 is at the heart of the so-called "methanol economy" that we have proposed with the late Prof. George Olah at our Institute. Recently, there has been significant progress in the low-temperature synthesis of formic acid (or formate salts) and methanol from CO2 and H2 using homogeneous catalysts. Importantly, several studies have combined CO2 capture and hydrogenation, where captured CO2 (including from air) was directly utilized to produce formate and CH3OH without requiring energy intensive desorption and compression steps. This Account centers on that topic. A key feature in the combined CO2 capture and conversion studies reported to date for the synthesis of formic acid and methanol is the use of an amine or alkali-metal hydroxide base for capturing CO2, which can assist the homogeneous catalysts in the hydrogenation step. We start this Account by examining the combined processes where CO2 is captured in amine solutions and converted to alkylammonium formate salts. The effect of amine basicity on the reaction rate is discussed along with catalyst recycling schemes. Next, methanol synthesis by this combined process, with amines as capturing agents, is explored. We also examine the system developments for effective catalyst and amine recycling in this process. We next go through the effect of catalyst molecular structure on methanol production while elucidating the main deactivating pathway involving carbonylation of the metal center. The recent advances in first-row transition metal catalysts for this process are also mentioned. Subsequently, we discuss the capture of CO2 using hydroxide bases and conversion to formate salts. The regeneration of the hydroxide base (NaOH or KOH) at low temperatures (80 °C) in cation-conducting direct formate fuel cells is presented. Finally, we review the challenges in the yet unreported integrated CO2 capture by hydroxide bases and conversion to methanol process.

Integrated Capture and Conversion of CO2 to Methane using a Water-lean, Post-Combustion CO2 Capture Solvent.

Efficient CO<sub>2</sub> capture by a novel deep eutectic solvent through facile, one-pot synthesis with low energy consumption and feasible regeneration

Integrated Capture and Conversion of CO2 to Methanol in a Post‐Combustion Capture Solvent: Heterogeneous Catalysts for Selective CN Bond Cleavage

An Integrated Carbon Dioxide Capture and Methanation Process

Post-combustion carbon capture process modeling, simulation, and assessment of synergistic effect of solvents

Flue-to-fuel: Bio-integrated carbon capture and utilization of dilute carbon dioxide gas streams to renewable methane

Kinetics, Thermodynamics, and Mechanism of a Novel Biphasic Solvent for CO2 Capture from Flue Gas

Integrated CO 2 capture and conversion into methanol units: Assessing techno-economic and environmental aspects compared to CO 2 into SNG alternative

Integrated CO2 Capture and Conversion to Formate and Methanol: Connecting Two Threads

Ionic Liquid-Ethanol Mixed Solvent Design for the Post-Combustion Carbon Capture

Integration of membrane contactors and catalytic solvent regeneration for efficient carbon dioxide capture

Experimental Study of the Absorption and Regeneration Performance of Several Candidate Solvents for Post-Combustion CO2 Capture

Integrated CO2 Capture and Dry Reforming of CH4 to Syngas: A Review

Integrated CO2 Capture and Utilization by Combining Calcium Looping with CH4 Reforming Processes: A Thermodynamic and Exergetic Approach

Reducing the energy penalty and corrosion of carbon dioxide capture using a novel nonaqueous monoethanolamine-based biphasic solvent

Waste CO 2 capture and utilization for methanol production via a novel membrane contactor reactor process: Techno-economic analysis (TEA), and comparison with other existing and emerging technologies

Bench-scale CO2 Capture Using Water-Lean Solvent of 2-(Ethylamino) Ethanol, 1-Methyl-2-pyrrolidinone, and Water

Modeling and Simulation of CO2 Capture Unit using Mixed Solvent of Aqueous Methyldiethanolamine and Piperazine for 6.4 MWe Power Plant

Integrated Carbon Dioxide Capture and Conversion to Methanol Utilizing Tertiary Amines over a Heterogenous Cu/ZnO/Al2O3 Catalyst.

Optimization of Post Combustion CO2 Capture from a Combined-Cycle Gas Turbine Power Plant via Taguchi Design of Experiment

Pilot Test of Water-Lean Solvent of 2-(Ethylamino) Ethanol, 1-Methyl-2-pyrrolidinone, and Water for Post-Combustion CO2 Capture