Abstract:Carbon capture and utilization (CCU) has emerged in recent years as a promising decarbonization solution for hard-to-abate industries. Compared to carbon capture and storage (CCS), CCU aims not for the storage of carbon dioxide (CO2) but for its use in the production of synthetic fuels, such as synthetic methanol (MeOH). Synthetic MeOH is produced through CO2 hydrogenation, utilizing green hydrogen (H2). Efficient use of CO2 and H2 feedstocks is essential to maximize the carbon reduction potential and energy efficiency of the process. This study performed an optimization analysis on a small-scale, containerized, and portable CO2 hydrogenation unit with a 5 kg MeOH/h production capacity goal, focusing on carbon conversion efficiency (CCE), MeOH yield, H2 consumption, and MeOH purity. The analysis was conducted using Aspen Plus V12. A single-pass model was used first to evaluate an initial reactor design. The reactor was then re-designed according to the results of the gas hourly space velocity (GHSV). The model was then expanded to include a recycling loop and the final reactor design was validated, aiming to maximize overall efficiency. The effects of the operational parameters including the reactor inlet temperature, reactor pressure, thermal fluid temperature, and condensation temperature were examined. The model was then further expanded to include the MeOH distillation process, and the effect of the distillation temperature was examined. The final product of the analysis was a fully-defined and optimized unit, achieving an 87.97% CCE and an 84.99% MeOH yield, consuming 1.11 kg H2/h for the production of 5.01 kg MeOH/h of 99.86 wt% purity. This study can provide valuable information and guidelines for designing small-scale, containerized, and portable CO2 hydrogenation units, which can serve as alternative solutions to address issues of H2 production and transportation related to large-scale installations.

Waste CO 2 capture and utilization for methanol production via a novel membrane contactor reactor process: Techno-economic analysis (TEA), and comparison with other existing and emerging technologies

A near-zero carbon emission methanol production through CO2 hydrogenation integrated with renewable hydrogen: Process analysis, modification and evaluation

Liquid-phase CO2 Hydrogenation to Methanol Synthesis: Solvent Screening, Process Design and Techno-Economic Evaluation

Comparative investigation of CO2-to-methanol process using different CO2 capture technologies

Conceptual Process Design and Technoeconomic Analysis of an e-Methanol Plant with Direct Air-Captured CO 2 and Electrolytic H 2

Evaluating Methanol and Liquid CO 2 Recovery from Waste-to-Energy Facilities: A Life Cycle Assessment Perspective

Integrated Capture and Conversion of CO2 to Methanol in a Post‐Combustion Capture Solvent: Heterogeneous Catalysts for Selective CN Bond Cleavage

Evaluation of alternative processes of methanol production from CO2: Design, optimization, control, techno-economic, and environmental analysis

Efficient Recycling and Conversion of CO 2 to methanol: Process Design and Environmental Assessment

Transforming CO2 into Synthetic Fuels: Modeling, Simulation, and Optimization Analysis of Methanol Production from Industrial Wastes

Carbon negative methanol production for CO 2 utilization: Process design and 4E analysis

Techno-economic Analysis and Optimization of Water-Gas Shift Membrane Reactors for Low-Carbon Hydrogen Production

Integrated CO 2 capture and conversion into methanol units: Assessing techno-economic and environmental aspects compared to CO 2 into SNG alternative

Integrated Capture and Conversion of CO2 to Methane using a Water-lean, Post-Combustion CO2 Capture Solvent.

Combination of CO 2 electrochemical reduction and biomass gasification for producing methanol: A techno-economic assessment

CO2-to-methanol: Economic and environmental comparison of emerging and established technologies with dry reforming and methane pyrolysis

Boosting carbon utilization efficiency for sustainable methanol production from biomass: Techno-economic and environmental analysis

Simultaneous Carbon Capture and Reuse Using Catalytic Membrane Reactor in Water-Gas Shift Reaction

Efficient Way of Carbon Dioxide Utilization in a Gas-to-Methanol Process: From Fundamental Research to Industrial Demonstration

Advanced Design and Comparative Analysis of Methanol Production Routes from CO2 and Renewable H2: via Syngas vs. Direct Hydrogenation Processes

Methanol production from water electrolysis and tri-reforming: Process design and technical-economic analysis