Abstract:Recently, post-combustion CO 2 removal has been considered also for the CO 2 separation from the flue gases of Waste-to-Energy (WtE) plants, that manage high amounts of Municipal Solid Waste (MSW) by combusting it and generating power and heat. Moreover, because of the presence in MSW of an organic waste fraction, net negative CO 2 emissions are feasible when integrating CCUS systems into WtE plants. Currently, to the best of the authors' knowledge, there are only few incineration plants around the world that are successfully coupled with a carbon capture system, resulting in near-zero (or even negative) CO 2 emission power generation. This work focuses on the evaluation of the whole value chain of the non-biogenic CO 2 that is emitted in a power plant located in Northern Italy and on its possible utilization, from the CO 2 source in the flue gas to the market-ready product. The design of the process for the CO 2 removal from the flue gas has been carried out specifically for the considered flue gas to be treated with an aqueous solution of MonoEthanolAmine 30% wt., the benchmark solvent used in other types of power plants (fuelled by coal and natural gas). The main process parameters (e.g., lean loading, absorber packing height, regenerator packing height, regenerator pressure, gas inlet temperature, solvent inlet temperature) have been selected in order to optimize the reboiler duty and the water requirement, the latter being usually not considered in literature works dealing with this type of analysis. Then, the CO 2 utilization has been evaluated, considering the options of both sequestration in the Adriatic Sea and utilization of CO 2 for production of sodium bicarbonate, on the basis of the information available in the literature. In compliance with Directive 2003/87/EC and with the Italian legislation, Waste-to-Energy plants that treat municipal solid waste are currently exempt from the application of the CO 2 Emissions Trading System (ETS). This article speculates about the application of the ETS to an urban WtE plant, located in Northern Italy, and evaluates its economic implications by comparing the purchase of emission quotas with the construction of a CCS or CCU plant. A business plan, detailing the obtained revenues from the utilization and from the avoided cost of purchasing emission allowances and the expenses related to the operation of the carbon capture plant, taking into account the taxes and the inflation, has been created and used for comparing the two considered CO 2 value chains. For the option of CO 2 sequestration, sensitivity analyses on the variation of investment costs (+10 %), operating costs (+10 %) and revenues (−10 %) have been performed and the breakeven value of the ETS certificate that can make the Net Present Value (NPV) non-negative has been determined. For the option of CO 2 utilization, the revenue from sodium bicarbonate that can make its production profitable has been evaluated.

Evaluating Methanol and Liquid CO 2 Recovery from Waste-to-Energy Facilities: A Life Cycle Assessment Perspective

A near-zero carbon emission methanol production through CO2 hydrogenation integrated with renewable hydrogen: Process analysis, modification and evaluation

Waste CO 2 capture and utilization for methanol production via a novel membrane contactor reactor process: Techno-economic analysis (TEA), and comparison with other existing and emerging technologies

CH4 and CO2 Reductions from Methanol Production Using Municipal Solid Waste Gasification with Hydrogen Enhancement

Utilizing carbon dioxide from refinery for methanol and electricity co-production: System design and economic assessment

Conceptual Process Design and Technoeconomic Analysis of an e-Methanol Plant with Direct Air-Captured CO 2 and Electrolytic H 2

A techno-economic and life cycle assessment for the production of green methanol from CO2: catalyst and process bottlenecks

Energy Recovery from Residual Municipal Solid Waste: State of the Art and Perspectives within the Challenge to Climate Change

Energy-environment-economy(3E) assessment of a novel low-carbon emission process integrating coal-to-methanol with green hydrogen

Integrated CO 2 capture and conversion into methanol units: Assessing techno-economic and environmental aspects compared to CO 2 into SNG alternative

Evaluation of alternative processes of methanol production from CO2: Design, optimization, control, techno-economic, and environmental analysis

Techno-economic assessment of the CO 2 value chain with CCUS applied to a waste-to-energy Italian plant

Combination of CO 2 electrochemical reduction and biomass gasification for producing methanol: A techno-economic assessment

Efficient Recycling and Conversion of CO 2 to methanol: Process Design and Environmental Assessment

Liquid-phase CO2 Hydrogenation to Methanol Synthesis: Solvent Screening, Process Design and Techno-Economic Evaluation

Comparative environmental assessment of methanol production technologies: A cradle-to-gate life cycle analysis

Life-cycle Analysis of Methanol Production from Coke Oven Gas in China

A Comprehensive Assessment of the Carbon Footprint of the Coal-to-Methanol Process Coupled with Carbon Capture-, Utilization-, and Storage-Enhanced Oil Recovery Technology

Assessment of methanol and electricity co-production plants based on coke oven gas and blast furnace gas utilization

Investigation of renewable methanol production from CO 2 hydrogeneration based on spectral splitting and heat integration

Comparative investigation of CO2-to-methanol process using different CO2 capture technologies