Abstract:An experiment system composed of a membrane absorption unit and three regeneration units was set up. The membrane absorption unit could be equipped with single and multiple modules in single cycle absorption mode. The three regeneration units included a hot regeneration, a vacuum desorption and an inert gas sweep. An efficient blended absorbent comprised of potassium glycinate (PG) and 2-amino-2-methyl-1-propanol (AMP) was developed in this work. Coupling process of membrane module-blended absorbent was evaluated by various operation modes such as single and multiple modules, single cycle absorption and regeneration, and continuous circulation of absorption and regeneration. Results show that performance of the blended absorbent (PG+AMP) was better than that of single ones (PG or AMP). The hot regeneration could give a high circular absorption capacity and a high regeneration efficiency while the vacuum desorption and the inert gas sweep gave a poor circular absorption capacity and a poor regeneration efficiency. Membrane flux of the coupling process increased as the gas and liquid flowrates increased. The absorption and regeneration time would greatly reduce by the assembly of multiple modules in consecutive and parallel modes. The circular absorption capacity and the regeneration efficiency by the hot regeneration were far larger than that by the membrane regeneration in the continuous circulation of absorption and regeneration. The membrane absorption process by coupling membrane and absorbent could be scale-up linearly. The parallel assembly mode of multiple modules was more effective than the consecutive assembly mode for CO2 capture.

Experimental Study on Postcombustion Systems Including a Hollow Fiber Membrane and a Packed Column

Systematic Design and Optimization of a Membrane–Cryogenic Hybrid System for CO2 Capture

Experimental Study on Hybrid MS‐CA System for Post‐combustion CO2 Capture

Post-combustion CO2 capture from a natural gas combined cycle power plant using activated carbon adsorption

Experimental Study on Carbon Capture Performance of Polyimide Hollow Fiber Membrane in Post-combustion Process

Synchronous Design of Membrane Material and Process for Pre-Combustion CO2 Capture: A Superstructure Method Integrating Membrane Type Selection.

Modeling of hollow fiber facilitated transport membrane modules for post combustion carbon capture process: Evaluation of non-ideal effect and module characteristic

Current status and advances in membrane technology for carbon capture

Ammonia-based post-combustion CO2 and SO2 integrating capture using multi-stage solvent circulation process

Membrane technology for CO2 capture: From pilot-scale investigation of two-stage plant to actual system design

Hybrid CO2 Capture Processes Consisting of Membranes: A Technical and Techno-Economic Review

Analysis and Comparison of the Membrane-Cryogenic Hybrid Process and Multistage Membrane Process for Pre-Combustion Carbon Capture Based on the Superstructure Method

An Energy–Economic–Environment Tri-Objective Evaluation Method for Gas Membrane Separation Processes of H2/CO2

Research progress in hollow fiber membranes for CO2 capture

Co2 Capture by Membrane Absorption Coupling Process: Experiments and Coupling Process Evaluation

Development and testing of a new post-combustion CO2 capture solvent in pilot and demonstration plant

Study on process intensification of pre combustion CO capture

Insight and Comparison of Energy-efficient Membrane Processes for CO2 Capture from Flue Gases in Power Plant and Energy-intensive Industry

Application of membrane separation technology in postcombustion carbon dioxide capture process

Advances in Post‐Combustion CO2Capture by Physical Adsorption: from Materials Innovation to Separation Practice

Progress of Separation of Carbon Dioxide from Gas Mixture by Gas Separation Membrane