Abstract:Membrane separation process is one of the most promising methods for post-combustion CO2 capture from coal-fired power plant. In this paper, a multicomponent gas separation process using spiral-wound membrane modules is explored to optimize its membrane area and energy consumption. Firstly, the parametric analysis is conducted for the single-stage membrane process to study the impact of the feed gas CO2 concentration, feed pressure and selectivity on the permeate gas flow rate, permeate gas CO2 concentration and membrane area. Secondly, a feasible procedure that maintains product purity and recovery is applied to discuss the impact of the membrane selectivity, permeance and the feed pressure on the two-stage membrane process. Based on the analysis and conclusions in the single-stage membrane process, the trade-off between membrane area and energy consumption has been analyzed in detail. By varying the selectivity and the feed pressure, the impact of these two parameters on the membrane area and energy consumption is discussed, finding that the combination of low selectivity in the first stage and high selectivity in the second stage has much smaller membrane area and slightly higher energy consumption than that of high selectivity in both stages. Moderate feed pressure, varying from 0.55 MPa to 0.65 MPa, is found to provide relatively low CO2 capture energy consumption. Techno-economic analysis is conducted to further validate the above strategy. To minimize the CO2 capture cost, high CO2 permeance and moderate selectivity is desirable for the first stage, while high selectivity and moderate CO2 permeance should be maintained for the second stage. The membrane developed for the flue gas CO2 capture do not have to simultaneously enhance the CO2/N2 selectivity and CO2 permeance. Even considering the uncertainties related to economic parameters, the optimum feed pressure that provides the minimum CO2 capture cost only varies from 0.69 MPa to 0.83 MPa.

Experimental Study on Carbon Capture Performance of Polyimide Hollow Fiber Membrane in Post-combustion Process

Process optimization of CO2membrane and cryogenic hybrid separation

Experimental Study on Postcombustion Systems Including a Hollow Fiber Membrane and a Packed Column

A High-Permeance Supported Carbon Molecular Sieve Membrane Fabricated by Plasma-Enhanced Chemical Vapor Deposition Followed by Carbonization for Co2 Capture

Application of membrane separation technology in postcombustion carbon dioxide capture process

Post-combustion CO2 capture with membrane process: Practical membrane performance and appropriate pressure

Experimental Study on Hybrid MS‐CA System for Post‐combustion CO2 Capture

Intensification of CO2 Separation Performance Via Cryogenic and Membrane Hybrid Process — Comparison of Polyimide and Polysulfone Hollow Fiber Membrane

Hollow Fiber Membrane Separation Process in the Presence of Gaseous and Particle Impurities for Post-Combustion CO2 Capture

Preparation and Performance Evaluation of an Asymmetric Polyimide Membrane Used in a Novel Solvent Absorption-Membrane Desorption CO2 Capture

Preparation and Performance Evaluation of an Asymmetric Polyimide Membrane Used in a Novel Solvent Absorption-Membrane Desorption CO 2 Capture

Hybrid CO2 Capture Processes Consisting of Membranes: A Technical and Techno-Economic Review

Modeling of hollow fiber facilitated transport membrane modules for post combustion carbon capture process: Evaluation of non-ideal effect and module characteristic

Porous Organic Cage Induced High CO2/CH4 Separation Efficiency of Carbon Molecular Sieve Membranes

Synchronous Design of Membrane Material and Process for Pre-Combustion CO2 Capture: A Superstructure Method Integrating Membrane Type Selection.

Parametric Study of a Novel Cryogenic-Membrane Hybrid System for Efficient CO2 Separation

Recent advances on membrane-based gas separation processes for CO2 separation

Modeling the mass transfer process in membranes for carbon capture and separation with concentration polarization effect

Status and Progress of Membrane Contactors in Post-Combustion Carbon Capture: A State-of-the-art Review of New Developments

Industrial-scale Spiral-Wound Facilitated Transport Membrane Modules for Post-Combustion CO2 Capture: Development, Investigation and Optimization

Analysis and Comparison of the Membrane-Cryogenic Hybrid Process and Multistage Membrane Process for Pre-Combustion Carbon Capture Based on the Superstructure Method