Abstract:Limiting the increase of CO2 in the atmosphere is one of the largest challenges of our generation<a href="/articles/s41586-019-1798-7#ref-CR1">1</a>. Because carbon capture and storage is one of the few viable technologies that can mitigate current CO2 emissions<a href="/articles/s41586-019-1798-7#ref-CR2">2</a>, much effort is focused on developing solid adsorbents that can efficiently capture CO2 from flue gases emitted from anthropogenic sources<a href="/articles/s41586-019-1798-7#ref-CR3">3</a>. One class of materials that has attracted considerable interest in this context is metal–organic frameworks (MOFs), in which the careful combination of organic ligands with metal-ion nodes can, in principle, give rise to innumerable structurally and chemically distinct nanoporous MOFs. However, many MOFs that are optimized for the separation of CO2 from nitrogen<a href="#ref-CR4">4</a>,<a href="#ref-CR5">5</a>,<a href="#ref-CR6">6</a>,<a href="/articles/s41586-019-1798-7#ref-CR7">7</a> do not perform well when using realistic flue gas that contains water, because water competes with CO2 for the same adsorption sites and thereby causes the materials to lose their selectivity. Although flue gases can be dried, this renders the capture process prohibitively expensive<a href="/articles/s41586-019-1798-7#ref-CR8">8</a>,<a href="/articles/s41586-019-1798-7#ref-CR9">9</a>. Here we show that data mining of a computational screening library of over 300,000 MOFs can identify different classes of strong CO2-binding sites—which we term 'adsorbaphores'—that endow MOFs with CO2/N2 selectivity that persists in wet flue gases. We subsequently synthesized two water-stable MOFs containing the most hydrophobic adsorbaphore, and found that their carbon-capture performance is not affected by water and outperforms that of some commercial materials. Testing the performance of these MOFs in an industrial setting and consideration of the full capture process—including the targeted CO2 sink, such as geological storage or serving as a carbon source for the chemical industry—will be necessary to identify the optimal separation material.

Design and development of 3D hierarchical ultra-microporous CO2-sieving carbon architectures for potential flow-through CO2 capture at typical practical flue gas temperatures

Recent Advances and Challenges in Ionic Materials for Post-Combustion Carbon Capture

Development of Ultramicropore-Mesopore Interconnected Pore Architectures for Boosting Carbon Dioxide Capture at Low Partial Pressure

A High-Permeance Supported Carbon Molecular Sieve Membrane Fabricated by Plasma-Enhanced Chemical Vapor Deposition Followed by Carbonization for Co2 Capture

Facile Synthesis of MOF-5-derived Porous Carbon with Adjustable Pore Size for CO2 Capture

Porous Carbon for CO2 Capture Technology: Unveiling Fundamentals and Innovations

Porous Adsorption Materials for Carbon Dioxide Capture in Industrial Flue Gas

A Two-Dimensional Stacked Metal-Organic Framework for Ultra Highly-Efficient CO2 Sieving

Recent Progress on Porous Carbons for Carbon Capture

Efficient carbon dioxide adsorption properties of cellular structure Li 4 SiO 4 sorbents prepared by additive manufacturing based on polymer-derived ceramics strategy

Controllable Construction of Amino-Functionalized Dynamic Covalent Porous Polymers for High-Efficiency CO2 Capture from Flue Gas

Easily-synthesized and low-cost amine-functionalized silica sol-coated structured adsorbents for CO2 capture

Emerging porous materials for carbon dioxide adsorptive capture: progress and challenges

Hierarchical porous AlOOH hollow microspheres for efficient CO2 capture

Carbonaceous materials-supported polyethylenimine with high thermal conductivity: A promising adsorbent for CO2 capture

Data-driven design of metal–organic frameworks for wet flue gas CO2 capture

A cost-effective synthesis of heteroatom-doped porous carbon by sulfur-containing waste liquid treatment: As a promising adsorbent for CO2 capture

A Sequential Flow Process of CO2 Capture and Conversion Using Cost-Effective Porous Organic Polymers

Porous carbon frameworks with high CO2 capture capacity derived from hierarchical polyimide/zeolitic imidazolate frameworks composite aerogels

Advances in Post‐Combustion CO 2 Capture by Physical Adsorption: From Materials Innovation to Separation Practice

Carbon-Based Materials for Low Concentration Co2 Capture and Electrocatalytic Reduction