Abstract:Among high-temperature sorbents, the remarkable stability, low regeneration temperature, and high cyclic sorption capacity of Li4SiO4 sorbent have attracted considerable attention. However, the high cost of lithium sources during the synthesis of Li4SiO4 has restricted its practical application. Meanwhile, the extensive utilization of lithium-ion batteries (LIBs) in renewable energy development has sparked concerns regarding the proper management of numerous discarded LIBs. The successful combination of the recycling of spent LIBs with carbon capture technology using Li4SiO4 sorbent can not only alleviate the waste problem of a large number of LIBs, but also effectively reduce the cost of materials required to capture CO2. Herein, LIBs were utilized to synthesize low-cost Li4SiO4 sorbents for CO2 capture, and the CO2 sorption/desorption performance was evaluated. The optimal regeneration temperatures of Li4SiO4 sorbents from LIBs are generally lower than the traditional regeneration temperature (>700 ℃) because of the existence of Li2SiO3 in fresh Li4SiO4 sorbents from LIBs, thereby reducing the energy consumption of CO2 capture. The results showed that the extraction rate of Li2CO3 increased by 69.92 % and 77.28 % respectively when graphitic carbon (GC) and banana peel activated carbon (BAC) were introduced during the extraction process compared to the absence of reductant. However, Li4SiO4 modified with graphitic carbon (Li4SiO4-GC) shows better cyclic CO2 capture performance than that modified with activated carbon from banana peels (Li4SiO4-BAC). It is found that Li4SiO4-GC could maintain a high sorption of 0.23 g/g after 50 cycles under the conditions of sorption temperature of 525 ℃, desorption temperature of 650 ℃, and 15 vol%CO2, owing to its more diverse variety of crystal phase substances, particularly Li3NaSiO4 crystal phase that plays a positive promoting role in the cyclic sorption/desorption. In addition, Li4SiO4-GC has more developed pore structure after cyclic reactions that other sorbents, which provides more channels for the diffusion of lithium ions, oxygen ions, and sodium ions, making it easier to adsorb more CO2 and increasing the overall reaction rate.

Efficient carbon dioxide adsorption properties of cellular structure Li 4 SiO 4 sorbents prepared by additive manufacturing based on polymer-derived ceramics strategy

Preparation and Co2 Sorption/Desorption of N-(3-Aminopropyl) Aminoethyl Tributylphosphonium Amino Acid Salt Ionic Liquids Supported into Porous Silica Particles

Design and development of 3D hierarchical ultra-microporous CO2-sieving carbon architectures for potential flow-through CO2 capture at typical practical flue gas temperatures

Structurally improved Li4SiO4 sorbents derived from lithium salicylate precursor for enhanced CO2 capture

CO2 high-temperature sorbent (Al, Fe, Ti) CO-doped Li4SiO4 from fly ash-derived SiO2 aerogel: In-situ synthesis, enhanced capture ability and long cycle stability

Enhanced high temperature cyclic CO2 capture on Li4SiO4 sorbent from two-dimensional SiO2 nanomeshes

Developing a Novel CaO-Based Sorbent for Promoted CO2 Capture and Tar Reduction

Novel synthesis of tailored Li4SiO4-based microspheres for ultrafast CO2 adsorption

In-Situ observation and quantitative analysis on sintering process of Li4SiO4 sorbents

Molten shell-activated, high-performance, un-doped Li4SiO4 for high-temperature CO2 capture at low CO2 concentrations

CO2 Adsorption by Polyamine-Based Protic Ionic Liquid-Functionalized Mesoporous Silica: Regenerability and Influence of Flue Gas Contaminants

Fabrication of porous Li4SiO4 ceramic sorbent pebbles with high CO2 sorption capacity via the simple freeze-drying method

Strengthening performance of Al-stabilized, CaO-based CO 2 sorbent pellets by the combination of impregnated layer solution combustion and graphite-moulding

Facile Synthesis of MOF-5-derived Porous Carbon with Adjustable Pore Size for CO2 Capture

Adsorption of high-temperature CO2 by Ca2+/Na+-doped lithium orthosilicate: characterization, kinetics, and recycle

Hydrophobic interface-assisted casting of Al-supported, CaO-based sorbent pellets for high-temperature CO 2 capture

New insights into stabilizing mechanism of Ca9Al6O18 stabilizing Ca-based sorbents for CO2 cyclic capture under mild conditions

Cyclic Performance Of Waste-Derived Sio2 Stabilized, Cao-Based Sorbents For Fast Co2 Capture

High efficiency CO2 sorption property of Li4SiO4 sorbent pebbles via a simple rolling ball method

Easily-synthesized and low-cost amine-functionalized silica sol-coated structured adsorbents for CO2 capture

Synthesis of high-performance Li4SiO4 sorbent for CO2 capture using Li2CO3 extracted from spent lithium batteries