Abstract:Post-combustion carbon capture using amine-based adsorbents is a highly competitive approach to control CO2 emissions from fossil fuel-fired power plants. However, it is well known that amine-based adsorbents suffer from long-term stability issues due to amine poisoning by flue gas contaminants. Minor contaminants, such as SO2, can preferably react with amine sites to form irreversible sulfonamides. This work investigated the effect of nitrates on the SO2 resistance of tetraethylenepentammonium nitrate protic ionic liquid-functionalized SBA-15 for CO2 capture. The tetraethylenepentamine-functionalized SBA-15 without nitrates was prepared as the control. The CO2 adsorption capacity was measured over multiple capture cycles in the presence of 500 ppm SO2. The CO2 capture capacities of the sorbent without nitrates decreased by 1.48 mmol g(-1) (50.3%) over 11 capture cycles. After introducing nitrates into the sorbent, the CO2 adsorption capacities only decreased by 0.55 mmol g(-1) (21.8%). In addition, the nitrates restricted the reaction between amine groups and SO2 leading to reversible sulfonamide products. The significant improvement in SO2 resistance was further explained with density functional theory (DFT) calculations, which revealed that the binding energy and net charge transfer between SO2 and amine groups were decreased after introducing the nitrate group into the amine. To further investigate the regenerability and structural stability of tetraethylenepentammonium nitrate-functionalized SBA-15 for CO(2 )capture under realistic conditions, the long-term operating performance was evaluated in a gas mixture of 150 ppm SO2, 150 ppm NO, 100% RH, 15% CO2, and balance N-2. The CO2 adsorption capacities and the structural properties of nitrate-containing sorbents were nearly unchanged over eight adsorption/regeneration cycles.

CO2 Adsorption by Polyamine-Based Protic Ionic Liquid-Functionalized Mesoporous Silica: Regenerability and Influence of Flue Gas Contaminants

Preparation and Co2 Sorption/Desorption of N-(3-Aminopropyl) Aminoethyl Tributylphosphonium Amino Acid Salt Ionic Liquids Supported into Porous Silica Particles

Highly Selective Mixed-Matrix Adsorbents Embedded with Anion-Pillared Microporous Materials and Poly(ionic Liquid)s Toward Sulfur Dioxide Capture

CO2 capture with polyamine-based protic ionic liquid functionalized mesoporous silica

Improvement of Adsorbent Materials for CO 2 Capture by Amine Functionalized Mesoporous Silica with Worm-Hole Framework Structure

Carbon dioxide capture by functionalized solid amine sorbents with simulated flue gas conditions.

Exploring the Stability on Exposure to Acid Impurities of Polyethyleneimine-Functionalized Silica for Post-Combustion CO2 Capture

Facile fabrication of mesoporosity silica as support for solid amine CO2 adsorbents with enhanced adsorption capacity and kinetics

Amine-functionalized Mesoporous Silica Derived from Natural Phyllosilicate for Efficient CO2 Adsorption

Polymeric Ionic Liquid Modified Silica for Co2 Adsorption and Diffusivity

Carbon Dioxide Adsorption on Polyacrylamide-Impregnated Silica Gel and Breakthrough Modeling

Enhanced SO2 resistance of tetraethylenepentammonium nitrate protic ionic liquid functionalized SBA-15 during CO2 capture from flue gas

Investigation of adsorption/desorption performance by aminopropyltriethoxysilane grafted onto different mesoporous silica for post-combustion CO2 capture

Utilizing silica fume and synthetically produced mesoporous silicas for simulated flue gas CO2 adsorption

Mesocellular Silica Foam Supported Polyamine Adsorbents for Dry CO2 Scrubbing: Performance of Single Versus Blended Polyamines for Impregnation

The Polymeric Ionic Liquids/mesoporous Alumina Composites: Synthesis, Characterization and CO2 Capture Performance Test

Efficient Co2 Capture on Low-Cost Silica Gel Modified by Polyethyleneimine

Synergistic Enhancement of CO2 Adsorption Capacity and Kinetics in Triethylenetetrammonium Nitrate Protic Ionic Liquid Functionalized SBA-15

Functional ionic liquid anchored TS-1 molecular sieve with multiple adsorption sites for efficient capture and separation of CO 2 in flue gas systems

The Influence of Pore Size and Pore Structure of Silica-Based Material on the Amine-Modified Adsorbent for CO2 Capture

Easily-synthesized and low-cost amine-functionalized silica sol-coated structured adsorbents for CO2 capture