Abstract:In this work, an experimental and theoretical investigation was conducted on the adsorptive removal of CO2 onto tetraethylenepentamine (TEPA) functionalized mesoporous SBA-15. The functionalization of SBA-15 silica with TEPA was achieved using a conventional wet impregnation technique. The structural properties of the mesoporous silica sorbents were characterized by nitrogen adsorption/desorption, SAXS, SEM, TEM, and FTIR techniques. The adsorption of CO2 on the amine-impregnated sorbent was measured by thermogravimetric method over a CO2 partial pressure range of 10–100 kPa and a temperature range of 30–100 °C under atmospheric pressure. The effects on CO2 adsorption capacity of temperature, partial pressure of CO2, amine loading, and moisture were evaluated. All the impregnated SBA-15 sorbents showed reversible CO2 adsorption behaviors with fast adsorption kinetics. The CO2 adsorption capacity measured at different temperatures suggests that the optimal adsorption temperature is 75 °C. The CO2 uptake of the amine-impregnated sorbent increased significantly in the presence of moisture. SBA-15 containing 60 wt % TEPA showed the highest CO2 adsorption capacity of 5.22 mmol/g in pure and humid CO2 at 75 °C. Temperature swing adsorption/desorption cycles were also explored using simulated flue gas in both dry and humid conditions, and it was found that CO2 uptake after ten cycles was within 90% of CO2 uptake of the first cycle. Different adsorption kinetic models have also been investigated to analyze the experimental data of CO2 uptake. The model was validated with the experimental results of isothermal adsorption measurements of CO2 on SBA-15/TEPA. It has been found that Fractional Order kinetic model (Chem. Eng. J. 2011, 173, 72) is very good over the entire adsorption region of the study with a maximum average absolute deviation between experimental CO2 uptake and that calculated from the model of about 2.42%.

Adsorption of CO2 from Simulated Flue Gas on Pentaethylenehexamine-Loaded Mesoporous Silica Support Adsorbent

Polyethylenimine-Grafted Hkust-Type Mof/Poiyhipe Porous Composites (Pei@Pgd-H) As Highly Efficient Co(2 )Adsorbents

Development of a Pentaethylenehexamine-Modified Solid Support Adsorbent for CO2 Capture from Model Flue Gas

Preparation and Co2 Sorption/Desorption of N-(3-Aminopropyl) Aminoethyl Tributylphosphonium Amino Acid Salt Ionic Liquids Supported into Porous Silica Particles

Adsorption separation of CO_2 from flue gas by hyperbranched solid-amine

CO2 Adsorption by Polyamine-Based Protic Ionic Liquid-Functionalized Mesoporous Silica: Regenerability and Influence of Flue Gas Contaminants

Adsorptive Removal of Carbon Dioxide Using Polyethyleneimine Supported on Propanesulfonic-Acid-Functionalized Mesoporous SBA-15

The Influence of Pore Size and Pore Structure of Silica-Based Material on the Amine-Modified Adsorbent for CO2 Capture

Facile fabrication of mesoporosity silica as support for solid amine CO2 adsorbents with enhanced adsorption capacity and kinetics

Promoting the CO2 Adsorption in the Amine-Containing SBA-15 by Hydroxyl Group

Adsorption of Carbon Dioxide on Organically Functionalized Sba-16

Carbon dioxide capture by functionalized solid amine sorbents with simulated flue gas conditions.

Carbon Dioxide Adsorption on Amine-Impregnated Mesoporous SBA-15 Sorbents: Experimental and Kinetics Study

Adsorption Capacity of Carbon Dioxide on Amine Modified Mesoporous Materials with Larger Pore Sizes

High CO2 adsorption on amine-functionalized improved macro-/mesoporous multimodal pore silica

Investigation of adsorption/desorption performance by aminopropyltriethoxysilane grafted onto different mesoporous silica for post-combustion CO2 capture

Direct Air Capture of CO2 Using Bi-Amines-functionlized Hierarchical Mesoporous Silica: Effects of Organic Amine Loading, Moisture and Temperature

Comparison of Characteristics and Performance Between PEI and DETA Impregnated on SBA-15 for CO2 Capture

Functionalization of Hierarchically Porous Silica Monoliths with Polyethyleneimine (pei) for Co2 Adsorption

Facile Preparation, Characterization and CO2 Adsorption Performance of "Dry Amine" Adsorbents

Enhanced CO2 Adsorptive Performance of PEI/SBA-15 Adsorbent Using Phosphate Ester Based Surfactants As Additives