Abstract:Separation of carbon dioxide from a humid mixture of CO2-N-2 through membranes containing immobilized solutions of Na2CO3-glycerol in porous and hydrophilic poly(vinylidene fluoride) (PVDF) substrate was experimentally studied for use as a venting membrane in space-walk applications. The effects of Na2CO3 concentration, CO2 partial pressure, and feed stream relative humidity (RH) were investigated. The carbonate concentration was in the range of 0-4.0 mol/dm(3). The feed gas RH range was 49-100%; the sweep gas was dry helium. CO2 partial pressure (p(CO2,f)) range was 0.007-0.77 arm. Addition of Na2CO3 increased the CO2 permeability drastically at lower carbonate concentrations; at higher Na2CO3 concentrations, this permeability increase is partly compromised by increased solution viscosity and salting-out effect. N-2 permeability coefficient decreased with an increase in Na2CO3 concentration. Very high CO2/N-2 selectivities were observed at high Na2CO3 concentrations. Higher CO2/N-2 selectivities were observed at lower CO2 partial pressure differentials. Steady-state water content in the hygroscopic immobilized liquid membrane (ILM) increases with an increase in feed stream RH. The water content in the ILM considerably affects its viscosity and the effective concentration of the carriers in the ILM; those factors determine the permeation performances of the ILM. Generally, lower permeances and greater CO2/N-2 selectivity values were observed at lower feed stream RHs. When the feed RH = 50.7%, P-CO2,P-f = 0.007 atm and the Na2CO3 concentration was 1.0 mol/dm(3); the separation factor alpha(CO2/N-2) observed was 3440. Prolonged runs lasting 14 days showed that the ILM permeation performances were quite stable. The ILMs were also found to be stable when challenged with feed streams of very low RHs.

Parametric Study of a Novel Cryogenic-Membrane Hybrid System for Efficient CO2 Separation

Selective CO2 Separation from CO2−N2 Mixtures by Immobilized Carbonate−Glycerol Membranes

Process optimization of CO2membrane and cryogenic hybrid separation

Intensification of CO2 Separation Performance Via Cryogenic and Membrane Hybrid Process — Comparison of Polyimide and Polysulfone Hollow Fiber Membrane

Systematic Design and Optimization of a Membrane–Cryogenic Hybrid System for CO2 Capture

Optimal Design of Hybrid Cryogenic Flash and Membrane System

Enhanced CO2/CH4 Separation Performance of a Mixed Matrix Membrane Based on Tailored MOF-Polymer Formulations

A High-Permeance Supported Carbon Molecular Sieve Membrane Fabricated by Plasma-Enhanced Chemical Vapor Deposition Followed by Carbonization for Co2 Capture

Experimental Study on Carbon Capture Performance of Polyimide Hollow Fiber Membrane in Post-combustion Process

Enhancing CO2/N2 separation performances by turning membrane affinity for CO2

The Separative Performance of Modules with Polymeric Membranes for a Hybrid Adsorptive/Membrane Process of CO2 Capture from Flue Gas

High-efficiency CO2 separation using hybrid LDH-polymer membranes

Preparation and Carbon Dioxide Separation Performance of A Hollow Fiber Supported Ionic Liquid Membrane

Study on the effect of process parameters on CO2/CH4 binary gas separation performance over NH2-MIL-53(Al)/cellulose acetate hollow fiber mixed matrix membrane

Design and analysis of cryogenic CO2 separation from a CO2‐rich mixture

Multivariate Polycrystalline Metal-Organic Framework Membranes for CO2/CH4 Separation.

Multivariate Polycrystalline Metal–Organic Framework Membranes for CO 2 /CH 4 Separation

Fabrication of Sub-Tg Cross-Linked and Thermally Rearranged Poly (Benzoxazole-Co-imide) Hollow Fiber Membrane Derived from Phenolphthalein-Based Copolyimide for CO2/CH4 Separation

Impacts of Green Synthesis Process on Asymmetric Hybrid PDMS Membrane for Efficient CO2/N2 Separation

Remarkably enhanced gas separation properties of PIM-1 at sub-ambient temperatures

High-performance CO2-selective Hybrid Membranes by Exploiting MOF-breathing Effects.