Abstract:In the realm of gas purifications, hollow fiber membranes have gained significant prominence due to their unique advantages. However, achieving defect-free membranes poses a considerable challenge. In this study, we addressed this challenge with a novel copolymer, 6FDA-DAM:DAP(2:1), comprising 4,4′-(hexafluoroisopropylidene) diphthalic anhydride (6FDA), 2,4.6-Trimethy-m-phenylenediamine (DAM), and a phenolphthalein-derived diamine of 3,3′-diaminophenolphthalein (DAP). We found that defect-free hollow fiber membranes could be prepared when 20 wt% or more ethanol was added in the polymer dope solution, but this led to the formation of oval hollow fibers that would be flattened under high pressure. We solved this limitation by lowering ethanol content to 15 wt%, adding 2 wt% LiNO3, and increasing the air–gap distance. These measures reduced the difference in phase inversion rates between the surface region and the bulk phase of the nascent hollow fiber. The CO2 permeance of this defect-free hollow fiber membrane reached 282 GPU with a CO2/CH4 selectivity of 50.2. Highly permeable defective hollow fiber membranes were also developed using a polymer dope without LiNO3 and a low THF content of 5 wt%. After coated by silicone rubber, CO2 permeance of the membrane reached 554 GPU with a CO2/CH4 selectivity of 45.0. In mixed gas tests, the two membranes exhibited O2 permeances of approximately 43.3 and 75.3 GPU, with O2/N2 selectivities of 5.5 and 5.4, respectively. Their CO2 permeances were 281 and 465 GPU, with CO2/CH4 selectivities of 45 and 41, CO2/N2 selectivities of 35.7 and 33.3, respectively. These separation performances were among the best of state-of-art polymeric hollow fiber membranes and demonstrated great potential for gas separation applications such as natural gas sweetening, flue gas treatment, and air separation.

Fabrication of Sub-Tg Cross-Linked and Thermally Rearranged Poly (Benzoxazole-Co-imide) Hollow Fiber Membrane Derived from Phenolphthalein-Based Copolyimide for CO2/CH4 Separation

Sub-Tg Cross-Linked Thermally Rearranged Polybenzoxazole Derived from Phenolphthalein Diamine for Natural Gas Purification

Fabrication of thermally rearranged (TR) polybenzoxazole hollow fiber membranes with superior CO 2 /N 2 separation performance

Thermal Crosslinking of a Novel Membrane Derived from Phenolphthalein-Based Cardo Poly(arylene Ether Ketone) to Enhance CO2/CH4 Separation Performance and Plasticization Resistance

Wet CO2/N2 Permeation through a Crosslinked Thermally Rearranged Poly(benzoxazole-co-imide) (XTR-PBOI) Hollow Fiber Membrane Module for CO2 Capture

Thermally rearranged poly(benzoxazole -co- imide) hollow fiber membranes for CO 2 capture

Ternary Mixed-Gas Separation for Flue Gas CO2 Capture Using High Performance Thermally Rearranged (TR) Hollow Fiber Membranes

Blended Crosslinked Polybenzoxazole (PBO) Membranes Derived from Phenolphthalein-Based Polyamide and Polyimide for CO2/CH4 Gas Separation

Constructing Thin and Cross-Linked Polyimide Membranes by Interfacial Reaction for Efficient CO 2 Separation

Enhanced CO2 Permeability of Thermal Crosslinking Membrane Via Sulfonation/desulfonation of Phenolphthalein-Based Cardo Poly(arylene Ether Ketone)

Thin-film Composite Membranes Based on Hyperbranched Poly(ethylene Oxide) for CO2/N2 Separation

Thermal crosslinking membrane with enhanced CO2 separation performance derived from nitrile-containing phenolphthalein-based poly (arylene ether ketone)

Thermally rearranged (TR) polybenzoxazole hollow fiber membranes for CO2 capture

Fabrication of high-flux defect-free hollow fiber membranes derived from a phenolphthalein-based copolyimide for gas separation

Preparation and gas separation performance of thermally rearranged poly(benzoxazole-co-amide) (TR-PBOA) hollow fiber membranes deriving from polyamides

Asymmetric copolyimide membranes fabricated by nonsolvent-induced phase separation for He/CH4 and He/N2 separation

Fabrication of highly selective hollow fiber membranes based on P84/PES blends for CO2/CH4 separation

Thin Film Mixed Matrix Hollow Fiber Membrane Fabricated by Incorporation of Amine Functionalized Metal-Organic Framework for CO2/N2 Separation

Enhanced CO2/CH4 Separation Performance of a Mixed Matrix Membrane Based on Tailored MOF-Polymer Formulations

Finely tuning the microporosity in dual thermally crosslinked polyimide membranes for plasticization resistance gas separations

Cross-Linked Thermally Rearranged Poly(Benzoxazole-Co-Imide) Membranes for Gas Separation