Abstract:Thin-film composite (TFC) polymeric membranes have attracted increasing interest to meet the demands of industrial gas separation. However, the development of high-performance TFC membranes within their current configuration faces two key challenges: (i) the thickness-dependent gas permeability of polymeric materials (mainly poly(dimethylsiloxane) (PDMS)) and (ii) the geometric restriction effect due to the limited pore accessibility of the underlying porous substrate. Here we demonstrate that the incorporation of trace amounts (∼1.8 wt %) of amorphous metal–organic framework (MOF) nanosheets into the gutter layer of TFC assemblies can simultaneously address these two limitations by the creation of rapid, transmembrane gas diffusion pathways. The resultant PDMS&MOF membrane displayed excellent CO2 permeance of 10450 GPU and CO2/N2 selectivity of 9.1. Leveraging this strategy, we successfully fabricate a novel TFC membrane, consisting of a PDMS&MOF gutter and an ultrathin (∼54 nm) poly(ethylene glycol) top selective layer via surface-initiated atom transfer radical polymerization. The complete TFC membrane exhibits excellent processability and remarkable CO2/N2 separation performance (1990 GPU with a CO2/N2 ideal selectivity of 39). This study reveals a strategy for the design and fabrication of a new TFC membrane system with unprecedented gas-separation performance.An MOF-doping method is provided to enhance the gas-separation performance of TFC membranes by offsetting the thickness-dependent permeability of PDMS and geometric restriction of TFC assemblies.This article has not yet been cited by other publications.

Thin-film Composite Membranes Based on Hyperbranched Poly(ethylene Oxide) for CO2/N2 Separation

Selective Permeation of CO2 Through a Composite Membrane with a Separation Layer of 2-N,n-dimethyl Aminoethyl Methacrylate and Acrylic Acid Copolymer

Constructing Thin and Cross-Linked Polyimide Membranes by Interfacial Reaction for Efficient CO 2 Separation

Covalent organic frameworks-incorporated thin film composite membranes prepared by interfacial polymerization for efficient CO2 separation

Construction of high-performance thin-film composite membrane for CO 2 separation via interface engineering

Fabrication of Sub-Tg Cross-Linked and Thermally Rearranged Poly (Benzoxazole-Co-imide) Hollow Fiber Membrane Derived from Phenolphthalein-Based Copolyimide for CO2/CH4 Separation

Fabrication and Characterization of Poly(vinylidene Fluoride)–polytetrafluoroethylene Composite Membrane for CO2 Absorption in Gas–liquid Contacting Process

Thermally stable, homogeneous blends of cross-linked poly(ethylene oxide) and crown ethers with enhanced CO2 permeability

Highly permeable polyethersulfone substrates with bicontinuous structure for composite membranes in CO2/N2 separation

Ultrapermeable Composite Membranes Enhanced Via Doping with Amorphous MOF Nanosheets

Enhanced polyphosphazene membranes for CO2/CH4 separation via molecular design

Ultrathin ionic COF Membrane via Polyelectrolyte‐Mediated Assembly for Efficient CO2 Separation

Thin Film Mixed Matrix Hollow Fiber Membrane Fabricated by Incorporation of Amine Functionalized Metal-Organic Framework for CO2/N2 Separation

High-Performance Polymers for Membrane Co2/N-2 Separation

New Generation High Performance Composite Hollow Fiber Membranes for Low Cost Co2 Capture

Pebax®/TSIL blend thin film composite membranes for CO2 separation

Enhanced 2-D MOFs nanosheets/PES-g-PEG mixed matrix membrane for efficient CO2 separation

Dialdehyde Polyethylene Glycol Cross‐linked Poly(vinyl Alcohol) Membranes with Enhanced CO2/N2 Separation Performance

Highly Polar but Amorphous Polymers with Robust Membrane CO2/N2 Separation Performance

High-efficiency CO2 separation using hybrid LDH-polymer membranes

Cross-Linked Polyphosphazene Blends as Robust CO2 Separation Membranes