Abstract:Climate change due to anthropogenic carbon dioxide emissions (e.g., combustion of fossil fuels) represents one of the most profound environmental disasters of this century. Equipping power plants with carbon capture and storage (CCS) technology has the potential to reduce current worldwide CO2 emissions. However, existing CCS schemes (i.e., amine scrubbing) are highly energy-intensive. The urgent abatement of CO2 emissions relies on the development of new, efficient technologies to capture CO2 from existing power plants. Membrane-based CO2 separation is an attractive technology that meets many of the requirements for energy-efficient industrial carbon capture. Within this domain, thin-film composite (TFC) membranes are particularly attractive, providing high gas permeance in comparison with conventional thicker (∼50 μm) dense membranes. TFC membranes are usually composed of three layers: (1) a bottom porous support layer; (2) a highly permeable intermediate gutter layer; and (3) a thin (<1 μm) species-selective top layer. A key challenge in the development of TFC membranes has been to simultaneously maximize the transmembrane gas permeance of the assembled membrane (by minimizing the gas resistance of each layer) while maintaining high gas-specific selectivity. In this Account, we provide an overview of our recent development of high-performance TFC membrane materials as well as insights into the unique fabrication strategies employed for the selective layer and gutter layer. Optimization of each layer of the membrane assembly individually results in significant improvements in overall membrane performance. First, incorporating nanosized fillers into the selective layer (poly(ethylene glycol)-based polymers) and reducing its thickness (to ca. 50 nm) through continuous assembly of polymers technology yields major improvements in CO2 permeance without loss of selectivity. Second, we focus on optimization of the middle gutter layer of TFC membranes. The development of enhanced gutter layers employing two- and three-dimensional metal-organic framework materials leads to considerable improvements in both CO2 permeance and selectivity compared with traditional poly(dimethylsiloxane) materials. Third, incorporation of a porous, flexible support layer culminates in a mechanically robust high-performance TFC membrane design that exhibits unprecedented CO2 separation performance and holds significant potential for industrial CO2 capture. Alternative strategies are also emerging, whereby the selective layer and gutter layer may be combined for enhanced membrane efficiency. This Account highlights the CO2 capture performance, current challenges, and future research directions in designing high-performance TFC membranes.

Construction of high-performance thin-film composite membrane for CO 2 separation via interface engineering

High‐Performance CO2 Capture Through Polymer‐Based Ultrathin Membranes

Constructing Thin and Cross-Linked Polyimide Membranes by Interfacial Reaction for Efficient CO 2 Separation

Enhanced selectivity in thin film composite membrane for CO 2 capture through improvement to support layer

Progressing thin-film membrane designs for post-combustion CO2 capture: performance or practicality?

Postcombustion Carbon Capture Using Thin-Film Composite Membranes

A High-Permeance Supported Carbon Molecular Sieve Membrane Fabricated by Plasma-Enhanced Chemical Vapor Deposition Followed by Carbonization for Co2 Capture

Interfacial Polymerization of COF-polyamide Composite Membranes Modified with Ionic Liquids for CO2 Separations

Interfacially polymerized thin film composite membranes containing ethylene oxide groups for CO2 separation

Ultrathin ionic COF Membrane via Polyelectrolyte‐Mediated Assembly for Efficient CO2 Separation

Covalent organic frameworks-incorporated thin film composite membranes prepared by interfacial polymerization for efficient CO2 separation

Ultrathin ionic COF Membrane via Polyelectrolyte-Mediated Assembly for Efficient CO<sub>2</sub> Separation

Interfacial polymerization of COF-polyamide composite membranes modified with ionic liquids for CO 2 separations

Thin-film Composite Membranes Based on Hyperbranched Poly(ethylene Oxide) for CO2/N2 Separation

A high performance antioxidative and acid resistant membrane prepared by interfacial polymerization for CO2 separation from flue gas

Fabrication of High-Performance Facilitated Transport Membranes for CO2 Separation

Interfacially polymerized polyetheramine thin film composite membranes with PDMS inter-layer for CO2 separation

Ultrathin PEI-functionalized Carboxyl Covalent Organic Framework Membranes for Efficient CO2/N2 Separation

Engineering the Ultrathin Polyamide Nanofilm Featuring High Free Volume Via Interfacial Polymerization for Efficient CO2 Capture

Ultrapermeable Composite Membranes Enhanced Via Doping with Amorphous MOF Nanosheets

Manipulating the Monomers Supply of Interfacial Polymerization Towards the Ultrathin Polyamide Composite Membrane for CO2 Capture