Abstract:Tremendous potential is seen in membrane technology for realizing efficient post-combustion CO 2 capture from power plant flue gas, the largest anthropogenic source of emission. However, an examination of existing literature revealed a substantial gap between the sheer number of lab-scale materials with extraordinary CO 2 /N 2 separation performance and the small fragment of large-scale commercial developments that still perform below the new competitive industrial targets. An effective material approach aiming to bridge this gap is the multilayer thin-film composite (TFC) membrane design, which allows for the transformation of thick dense membranes with excellent theoretical intrinsic performances into a practical thin (<1 μm) to ultrathin-film (<100 nm) configuration with high CO 2 permeance and CO 2 /N 2 selectivity. Unavoidably, many design constraints surfaced during this transition due to the challenges of ultrathin-film fabrication, porous substrate design, increased vulnerability and deviation of gas transport properties at the thin-film state, which all compromise the scalability of TFC membranes. Yet, these constraints are often overlooked topics in current TFC membrane studies as they are generally performance-pursuing and tend to be more zealous about the discovery or re-innovating of novel selective layer materials with less concern over practicality issues. In this perspective, key existing TFC design criteria are revisited for each TFC component/layer with a critical evaluation of their oversight for some of the practical considerations, while keen research suggestions are being made in areas that could potentially enhance the performance or scalability of current designs, such as materials recommendation, structural modification targets, mechanistic study of thin-film state transport, and knowledge development for upscaling. Besides the conventional layer-on-layer TFC design, an integrated layer concept established on a microporous gutter layer is also proposed here. Lastly, the potential for translating existing flat sheet TFC designs into the industrially favorable hollow fiber configuration has been quite rigorously assessed.

Enhanced selectivity in thin film composite membrane for CO 2 capture through improvement to support layer

Construction of high-performance thin-film composite membrane for CO 2 separation via interface engineering

Ultrathin covalent organic framework film as membrane gutter layer for high-permeance CO2 capture

Progressing thin-film membrane designs for post-combustion CO2 capture: performance or practicality?

A High-Permeance Supported Carbon Molecular Sieve Membrane Fabricated by Plasma-Enhanced Chemical Vapor Deposition Followed by Carbonization for Co2 Capture

High-throughput CO2 capture using PIM-1@MOF based thin film composite membranes

Covalent organic frameworks-incorporated thin film composite membranes prepared by interfacial polymerization for efficient CO2 separation

Ultrapermeable Composite Membranes Enhanced Via Doping with Amorphous MOF Nanosheets

Stiff Metal–organic Framework–polyacrylonitrile Hollow Fiber Composite Membranes with High Gas Permeability

High-performance COFs Composite Nanofiltration Membrane Fabricated by Organobase Catalyst

A microporous polymer TFC membrane with 2-D MOF nanosheets gutter layer for efficient H2 separation

Thin film composite membranes for postcombustion carbon capture: Polymers and beyond

Breaking The Permeance‐Selectivity Tradeoff for Post‐Combustion Carbon Capture: A Bio‐Inspired Strategy to Form Ultrathin Hollow Fiber Membranes

Enhancing the Permselectivity of Thin-Film Composite Membranes Interlayered with MoS 2 Nanosheets via Precise Thickness Control

Interfacial polymerization of COF-polyamide composite membranes modified with ionic liquids for CO 2 separations

Thin Film Composite Membrane Comprising Ionic Liquid/Graphene Oxide in the Selective Layer for Enhanced CO 2 Separation

Design and preparation of woven fabric-reinforced substrate: A new pathway for robust thin film composite membrane

Constructing Thin and Cross-Linked Polyimide Membranes by Interfacial Reaction for Efficient CO 2 Separation

Ultrathin ionic COF Membrane via Polyelectrolyte‐Mediated Assembly for Efficient CO2 Separation

Bicontinuous substrates with reduced pore restriction for CO2-selective composite membranes

Preparation of thin-film composite membranes with ultrahigh MOFs loading through polymer-template MOFs induction secondary interfacial polymerization