Abstract:Tremendous potential is seen in membrane technology for realizing efficient post-combustion CO 2 capture from power plant flue gas, the largest anthropogenic source of emission. However, an examination of existing literature revealed a substantial gap between the sheer number of lab-scale materials with extraordinary CO 2 /N 2 separation performance and the small fragment of large-scale commercial developments that still perform below the new competitive industrial targets. An effective material approach aiming to bridge this gap is the multilayer thin-film composite (TFC) membrane design, which allows for the transformation of thick dense membranes with excellent theoretical intrinsic performances into a practical thin (<1 μm) to ultrathin-film (<100 nm) configuration with high CO 2 permeance and CO 2 /N 2 selectivity. Unavoidably, many design constraints surfaced during this transition due to the challenges of ultrathin-film fabrication, porous substrate design, increased vulnerability and deviation of gas transport properties at the thin-film state, which all compromise the scalability of TFC membranes. Yet, these constraints are often overlooked topics in current TFC membrane studies as they are generally performance-pursuing and tend to be more zealous about the discovery or re-innovating of novel selective layer materials with less concern over practicality issues. In this perspective, key existing TFC design criteria are revisited for each TFC component/layer with a critical evaluation of their oversight for some of the practical considerations, while keen research suggestions are being made in areas that could potentially enhance the performance or scalability of current designs, such as materials recommendation, structural modification targets, mechanistic study of thin-film state transport, and knowledge development for upscaling. Besides the conventional layer-on-layer TFC design, an integrated layer concept established on a microporous gutter layer is also proposed here. Lastly, the potential for translating existing flat sheet TFC designs into the industrially favorable hollow fiber configuration has been quite rigorously assessed.

Breaking The Permeance‐Selectivity Tradeoff for Post‐Combustion Carbon Capture: A Bio‐Inspired Strategy to Form Ultrathin Hollow Fiber Membranes

Ultrapermeable Composite Membranes Enhanced Via Doping with Amorphous MOF Nanosheets

Carbon Molecular Sieve Membranes with Ultra‐Thin Selective Skin Layer by Pyrolysis of Porous Hollow Fibers

High-throughput CO2 capture using PIM-1@MOF based thin film composite membranes

A High-Permeance Supported Carbon Molecular Sieve Membrane Fabricated by Plasma-Enhanced Chemical Vapor Deposition Followed by Carbonization for Co2 Capture

Enhanced selectivity in thin film composite membrane for CO 2 capture through improvement to support layer

Progressing thin-film membrane designs for post-combustion CO2 capture: performance or practicality?

Thin-film Composite Membranes Based on Hyperbranched Poly(ethylene Oxide) for CO2/N2 Separation

New Generation High Performance Composite Hollow Fiber Membranes for Low Cost Co2 Capture

Facile fabrication of FAS-PDMS/PEEK composite hollow fiber membrane with honeycomb-like structure for CO2 capture from flue gas by membrane absorption

High-efficiency CO2 separation using hybrid LDH-polymer membranes

Constructing Thin and Cross-Linked Polyimide Membranes by Interfacial Reaction for Efficient CO 2 Separation

Unveiling the Potential: Core‐Shell Nanoparticles Assembly of Metal‐Organic Framework@poly(1,3‐dioxolane) Methacrylate for Gutter‐Layer‐Free Ultrathin Film Composite Membranes

Ultrathin covalent organic framework film as membrane gutter layer for high-permeance CO2 capture

A microporous polymer TFC membrane with 2-D MOF nanosheets gutter layer for efficient H2 separation

PDMS thin-film composite membrane fabricated by ultraviolet crosslinking acryloyloxy-terminated monomers

Boosting CO2 Transport of Poly (ethylene Oxide) Membranes by Hollow Rubik-like “expressway” Channels with Anion Pillared Hybrid Ultramicroporous Materials

Preparation of a novel dual-layer polyvinylidene fluoride hollow fiber composite membrane with hydrophobic inner layer for carbon dioxide absorption in a membrane contactor

Construction of high-performance thin-film composite membrane for CO 2 separation via interface engineering

Post-combustion CO2 capture with sweep gas in thin film composite (TFC) hollow fiber membrane (HFM) contactor

Fabrication of highly selective hollow fiber membranes based on P84/PES blends for CO2/CH4 separation