Abstract:Diagram of hydrogen bond interactions between Pebax® 1657 and SSMMP‐20%‐[bmim][Tf2N] filler. Mixed matrix membranes (MMMs) have been proposed as a solution to surmount Robeson's trade‐off curves and have demonstrated efficacy in gas separation processes, particularly for CO2 capture. In this study, MMMs based on Pebax®1657 were obtained utilizing synthetic silico‐metallic mineral particles (SSMMP) functionalized with ionic liquids (ILs). The objective was to attain enhanced CO2 separation performance, thereby showcasing the potential to mitigate the environmental repercussions of industrial processes that entail greenhouse gas emissions. For membrane production, an ethanol/water mixture was used as solvent, with the SSMMP/IL content varying from 0.5 to 20% by weight of the polymer. The primary aim of this study was to assess the effect of filler addition on permeability and selectivity for CO2, CH4, and N2. Comprehensive analyses, including SEM, FTIR, TGA, DSC, and DMA were conducted to evaluate the properties of the produced membranes. Gas permeability and ideal selectivity were measured at 25°C and different pressures, ranging from 1 to 7 bar. Characterization results demonstrate that the glass transition temperature (Tg) of MMMs increased compared to pure Pebax®1657, indicating that the addition of SSMMP/IL reduces the flexibility of the PEO chains, forming a rigid interface at the polymer/filler, which may enhance selectivity. This effect, corroborated by gas permeation, was observed for both CO2/N2 and CO2/CH4. For CO2/N2, the highest selectivity was achieved at lower filler concentrations, gradually decreasing as the filler load increased. MMM‐0.5 wt% achieved the highest selectivity of 91.96. The membrane CO2 permeability rose with an elevated filler content, rising from 84.21 for pure Pebax®1657 to 192.17 Barrer for MMM‐20 wt% at 4 bar. The permeability results were influenced by the gas diffusion coefficients of the MMMs, which increased with increasing SSMMP/IL content. The effect of feed pressure on MMM‐5 wt% was also assessed, revealing that CO2 permeability increased with increasing pressure, from 126.72 Barrer at 1 bar to 165.56 Barrer at 7 bar. This work showcased the viability of MMMs incorporating SSMMP/IL for industrial use, as they displayed separation capabilities that exceeded the 2008 Robeson upper bound. Highlights Mixed matrix membranes based on Pebax®1657 and SSMMP‐20%‐[bmim][Tf2N] were prepared. CO2 permeability of the MMMs was increased by 128% and CO2/N2 selectivity by 83%. Higher CO2 pressures increase MMMs permeability. The obtained MMMs have separation performances above the Robeson upper Bound.

Boosting CO2 Transport of Poly (ethylene Oxide) Membranes by Hollow Rubik-like “expressway” Channels with Anion Pillared Hybrid Ultramicroporous Materials

Enhanced Ethylene Transport of Mixed-Matrix Membranes by Incorporating Anion-Pillared Hybrid Ultramicroporous Materials Via in Situ Growth

Molecular‐Sieving Membrane by Partitioning the Channels in Ultrafiltration Membrane by in Situ Polymerization

GeFSIX‐1‐Cu Based Semi‐interpenetrating Network Mixed Matrix Membranes for Efficient CO2 Separation

Enhancing CO2/N2 and CO2/CH4 separation in mixed matrix membrane: A comprehensive study on Pebax®1657 with SSMMP/IL for improved efficiency

Mixed Matrix Membranes for Efficient CO2 Separation Using an Engineered UiO-66 MOF in a Pebax Polymer

Vesicles-Shaped Mof-Based Mixed Matrix Membranes With Intensified Interfacial Affinity And Co2 Transport Freeway

Highspeed Transport Pathway Dominated by Continuous Arrangement of Micron-Sized Hollow MOFs in MMMs to Accelerate CO2 Permeation

Pebax/two-dimensional MFI nanosheets mixed-matrix membranes for enhanced CO2 separation

Efficient CO 2 Separation of Multi-Permselective Mixed Matrix Membranes with a Unique Interfacial Structure Regulated by Mesoporous Nanosheets

Carbon Dioxide Enrichment PEBAX/MOF Composite Membrane for CO2 Separation

Developing Mixed Matrix Membranes with Good CO2 Separation Performance Based on PEG-Modified UiO-66 MOF and 6FDA-Durene Polyimide

Preparation of Pebax 1657/MAF-7 Mixed Matrix Membranes with Enhanced CO2/N2 Separation by Active Site of Triazole Ligand

Cross-Linked Mixed-Matrix Membranes Using Functionalized UiO-66-NH2 into PEG/PPG-PDMS-Based Rubbery Polymer for Efficient CO2 Separation

Boosting Carbon Capture with CO 2 -Ultrapermeable Molecularly Imprinted Membranes

ZIF-8 nanoparticles with tunable size for enhanced CO2 capture of Pebax based MMMs

Nanocomposite polymer blend membrane molecularly re-engineered with 2D metal-organic framework nanosheets for efficient membrane CO2 capture

Fabrication, Facilitating Gas Permeability, and Molecular Simulations of Porous Hypercrosslinked Polymers Embedding 6FDA-Based Polyimide Mixed-Matrix Membranes

Enhanced 2-D MOFs nanosheets/PES-g-PEG mixed matrix membrane for efficient CO2 separation

Pebax‐based Mixed Matrix Membranes Loaded with Graphene Oxide/core Shell ZIF‐8@ZIF‐67 Nanocomposites Improved CO2 Permeability and Selectivity

Constructing multi-dimensional transport pathways by mixed-dimensional fillers in membranes for efficient CO 2 separation