Abstract:Currently, biphasic solvents are receiving more attention for CO2 capture due to their energy-saving potential. Whereas, most of the current biphasic solvents still suffer from high viscosity and low regeneration efficiency. To solve this problem, a novel tri-solvent biphasic solvent triethylenetetramine (TETA)-2-amino-2-methyl-1-propanol (AMP)-1-dimethylamino-2-propanol (1DMA2P) was proposed in this study, and its absorption properties, viscosity changes, desorption properties, recyclability capacity, and reaction mechanism were explored. The results showed that the CO2 absorption load showed a trend of firstly increasing and then decreasing with the increase of AMP concentration. Although the volume of the rich phase increased with increasing AMP concentration after the absorption, it also decreases the viscosity growth. The viscosity of the solution decreased from 498 mPa•s to 91 mPa•s. During the desorption process, the maximal desorption rates of AMP-containing solvents is significantly greater than that of 2 mol/L (M) TETA + 2 M 1DMA2P (2T2D). Simultaneously, the recyclability capacity of the AMP-containing solvents were also significantly higher than that of 2T2D. The regeneration efficiency of 1.5 M TETA + 0.5 M AMP + 2 M 1DMA2P (1.5T0.5A2D) was 81.92%. It was concluded by 13C NMR analysis that amino groups in TETA and AMP can react with CO2 to form carbamates and carbonates. Since AMP in the biphasic solution can generate free protons through various pathways during the desorption process, it promotes the decomposition of TETA-carbamate. This process achieves the deep stripping of CO2 in biphasic solvent. Overall, TETA-AMP-1DMA2P solution is a promising energy-saving candidate for industrial CO2 capture due to its competitive absorption-desorption performance and low viscosity.

Multi-stage solvent circulation absorption enhancement: System optimization for energy-saving CO 2 capture

Multi-stage Solvent Circulation Absorption Enhancement: System Optimization for Energy-Saving CO2 Capture

Multistage Circulation Absorption Improvement: Simulation and Energy-Saving Evaluation of an Innovative Amine-Based CO2 Capture Process

Systematic Design and Optimization of a Membrane–Cryogenic Hybrid System for CO2 Capture

Ammonia-based post-combustion CO2 and SO2 integrating capture using multi-stage solvent circulation process

A multiobjective experimental based optimization to the CO2 capture process using hybrid solvents of MEA-MeOH and MEA-water

Process Simulations of CO2 Desorption in the Interaction between the Novel Direct Steam Stripping Process and Solvents

Optimization of solvent properties for post-combustion CO2 capture using process simulation

Integration of membrane contactors and catalytic solvent regeneration for efficient carbon dioxide capture

Reducing Aerosol Emissions by Decoupled Parameter Management During the CO2 Capture Process in a Multi-stage Circulation Absorber.

Reducing the energy penalty and corrosion of carbon dioxide capture using a novel nonaqueous monoethanolamine-based biphasic solvent

Novel alkanolamine-based biphasic solvent for CO 2 capture with low energy consumption and phase change mechanism analysis

Modelling and Process Analysis of Post-Combustion Carbon Capture with the Blend of 2-Amino-2-methyl-1-propanol and Piperazine

New improvement of amine-based CO2 capture processes using heat integration and optimization

Energy-efficient biphasic solvents for industrial CO2 capture: Absorption mechanism and stability characteristics

Novel Biphasic Solvent of AEP/1-propanol/H2O for CO2 Capture with Efficient Regeneration Performance and Low Energy Consumption

Evaluating Energy-Efficient Solutions of CO2 Capture Within Tri-solvent MEA+BEA+AMP Within 0.1+2+2–0.5+2+2 Mol/l Combining Heterogeneous Acid–Base Catalysts

Improving the absorption load, high viscosity, and regeneration efficiency of CO2 capture using a novel tri-solvent biphasic solvents of TETA-AMP-1DMA2P

Energy-Efficient Biphasic Solvents for Industrial Carbon Capture: Role of Physical Solvents on CO2 Absorption and Phase Splitting.

Evaluation of hybrid amines and alcohol solvent with ion-exchange resin catalysts for energy-efficient CO 2 capture

New Approach with Universal Applicability of Evaluating the Heat Requirements in Solvent Regeneration Process for Post-Combustion CO2 Capture