Abstract:Carbon capture, utilization, and storage have the potential to reduce human-made carbon dioxide emissions significantly. The energy consumption of water-based carbon capture technology has a significantly negative relationship with the partial pressure of carbon dioxide in the gas, which can be improved by increasing the carbon dioxide concentration or the total pressure of the gas. This work proposes a novel system integrating water-based carbon capture with adiabatic compressed air energy storage system to address these problems. The flue gas with a higher carbon dioxide concentration is employed as the working fluid of the adiabatic compressed air energy storage, and the flue gas's total pressure is raised by the compression train. Thermodynamic analysis was evaluated using steady-state mathematical models and thermodynamic laws. The calculated results show that the energy consumption of carbon capture is 354.23 kWh/t, which is significantly lower than amine-based capture technology (about 1000 kWh/t). The carbon dioxide in the flue is removed in the charging process resulting in the total mass of compressed gas being higher than the expanding one. Hence, additional compression heat can be utilized for heat supply in discharging process, causing the total exergy efficiency of the proposed system is 69.57 % which improves by more than 5 % compared with conventional adiabatic compressed air energy storage system. Meanwhile, the parameter analysis is also carried out to evaluate the influence of several key parameters on the performance of the proposed system. Furthermore, the payback period of around 5.10 years indicates that the proposed system is economically feasible.

Reducing Aerosol Emissions by Decoupled Parameter Management During the CO2 Capture Process in a Multi-stage Circulation Absorber.

Reducing Aerosol Emissions by Decoupled Parameter Management during the CO 2 Capture Process in a Multi-stage Circulation Absorber

Reducing Aerosol and Ammonia Emission in Post-Combustion CO2 Capture: Additives As Key Solutions

Systematic Design and Optimization of a Membrane–Cryogenic Hybrid System for CO2 Capture

Preventing Aerosol Emissions in a CO2 Capture System: Combining Aerosol Formation Inhibition and Wet Electrostatic Precipitation

Optimal Design of a Subambient Membrane Separation System with Work and Heat Integration for CO2 Capture

Multi-stage Solvent Circulation Absorption Enhancement: System Optimization for Energy-Saving CO2 Capture

Reducing aerosol and ammonia emission in post-combustion CO 2 capture: Additives as key solutions

Multi-stage solvent circulation absorption enhancement: System optimization for energy-saving CO 2 capture

Ammonia-based post-combustion CO2 and SO2 integrating capture using multi-stage solvent circulation process

Aerosol Emissions and Mitigation of Aqueous AMP/PZ Solvent for Postcombustion CO2 Capture

Multistage Circulation Absorption Improvement: Simulation and Energy-Saving Evaluation of an Innovative Amine-Based CO2 Capture Process

Research and Application Analysis on the Pollution Control of Tail Gas Emissions from Co2 Capture Absorber

Solvent emissions control in large scale chemical absorption CO2 capture plant

Simulation and Optimization of Carbon Dioxide Capture Using Water-Lean Solvent from Industrial Flue Gas

Sustainable CO2 management through integrated CO2 capture and conversion

Modelling and Process Analysis of Post-Combustion Carbon Capture with the Blend of 2-Amino-2-methyl-1-propanol and Piperazine

Intrinsic Insight of Energy-Efficiency Optimization for CO2 Capture by Amine-Based Solvent: Effect of Mass Transfer and Solvent Regeneration

Resolving the Contradiction Caused by Water-Lean Solvent Through a Split-Flow Heat Exchange Strategy Toward Efficient Carbon Dioxide Capture

Flexibility Analysis on Absorption-Based Carbon Capture Integrated with Energy Storage

Design and performance evaluation of a novel system integrating Water-based carbon capture with adiabatic compressed air energy storage