Abstract:The pursuit of low-energy-consumption CO2 capture technology has promoted the renewal and iteration of absorbents for chemical absorption. In order to evaluate the regeneration energy consumption of absorbents and obtain the distribution of energy consumption, a coupling method combining rigorous energy balance and simple estimation is proposed in this study. The data regarding energy balance and material balance from process simulation are transformed into the model parameters required in the simple estimation model. Regenerative energy consumption and distribution are determined by the empirical estimation formula. Two CO2 capture processes of an MEA aqueous solution and MEA–n-propanol aqueous solution (phase-change absorbent) were used to verify the feasibility and applicability of the coupling method. The effects of n-propanol concentration, CO2 loading in the lean solution, and temperature on energy consumption were discussed. The results show that the energy consumption of 30 wt% MEA aqueous solution is the lowest at 3.92 GJ·t−1-CO2 when CO2 load in the lean solution is 0.2 mol CO2·mol−1-MEA, and the reaction heat Qrec, sensible heat Qsen, and latent heat Qlatent were 1.97 GJ·t−1-CO2, 1.09 GJ·t−1-CO2, and 0.86 GJ·t−1-CO2, respectively. The lowest energy consumption of the phase-change absorbent with CO2 loading of 0.35 mol CO2·mol−1-MEA in the lean solution is 2.32 GJ·t−1-CO2. Qrec, Qsen, and Qlatent were 1.9 GJ·t−1-CO2, 0.29 GJ·t−1-CO2, and 0.14 GJ·t−1-CO2, respectively. This study provides a simple and meaningful method for accurately assessing absorber performance and process improvement, which can accelerate the development of economically viable, absorption-based CO2 capture processes.

Reducing Aerosol Emissions by Decoupled Parameter Management during the CO 2 Capture Process in a Multi-stage Circulation Absorber

Reducing Aerosol Emissions by Decoupled Parameter Management During the CO2 Capture Process in a Multi-stage Circulation Absorber.

Reducing Aerosol and Ammonia Emission in Post-Combustion CO2 Capture: Additives As Key Solutions

Systematic Design and Optimization of a Membrane–Cryogenic Hybrid System for CO2 Capture

Optimal Design of a Subambient Membrane Separation System with Work and Heat Integration for CO2 Capture

Multi-stage Solvent Circulation Absorption Enhancement: System Optimization for Energy-Saving CO2 Capture

Preventing Aerosol Emissions in a CO2 Capture System: Combining Aerosol Formation Inhibition and Wet Electrostatic Precipitation

Multi-stage solvent circulation absorption enhancement: System optimization for energy-saving CO 2 capture

Reducing aerosol and ammonia emission in post-combustion CO 2 capture: Additives as key solutions

Ammonia-based post-combustion CO2 and SO2 integrating capture using multi-stage solvent circulation process

Multistage Circulation Absorption Improvement: Simulation and Energy-Saving Evaluation of an Innovative Amine-Based CO2 Capture Process

Aerosol Emissions and Mitigation of Aqueous AMP/PZ Solvent for Postcombustion CO2 Capture

Research and Application Analysis on the Pollution Control of Tail Gas Emissions from Co2 Capture Absorber

Solvent emissions control in large scale chemical absorption CO2 capture plant

Modelling and Process Analysis of Post-Combustion Carbon Capture with the Blend of 2-Amino-2-methyl-1-propanol and Piperazine

Flexibility Analysis on Absorption-Based Carbon Capture Integrated with Energy Storage

Sustainable CO2 management through integrated CO2 capture and conversion

Intrinsic Insight of Energy-Efficiency Optimization for CO2 Capture by Amine-Based Solvent: Effect of Mass Transfer and Solvent Regeneration

Simulation and Optimization of Carbon Dioxide Capture Using Water-Lean Solvent from Industrial Flue Gas

Process Design and Optimization of State‐of‐the‐art Carbon Capture Technologies

A Coupling Calculation Method of Desorption Energy Distribution Applied to CO2 Capture by Chemical Absorption