Abstract:A plasma‐enhanced atomic layer deposition (PEALD) process using Ta(NtBu)(NEt2)3 (TBTDET) is developed to prepare high‐quality halogen‐free Ta films. The deposited Ta films show good wettability, adhesion property, and barrier property. Uniform Ta films can be conformally deposited into narrow trench and via interconnect structures, which highlights the suitability of this process for the BEOL interconnect technology. As integrated circuits continue to shrink in size, the demand for high‐quality adhesive layers in copper Damascene interconnects has increased. However, tantalum (Ta) films, used as liners, prepared by atomic layer deposition (ALD) from metal halide precursors, are prone to corrosion and exhibit issues such as low film density and unstable performance. In this study, Ta films are successfully fabricated using a plasma‐enhanced ALD (PEALD) process with an organometallic precursor of Ta(NtBu)(NEt2)3 (TBTDET). The study of the growth conditions reveals that introducing 10% Ar in Ar‐H2 mixed gas leads to continuous high‐quality Ta films. The deposited Ta films are free of halogen impurities, which can avoid the detrimental impact on the stability of the Cu interconnects. Although the films contain some carbon and nitrogen impurities, they do not affect the film adhesive properties. Transmission electron microscopy shows that the Ta films are amorphous, and the amorphous Ta films exhibit superior barrier properties. Moreover, highly uniform Ta films can be conformally deposited into narrow interconnect structures using this PEALD process. These findings suggest that the Ta films prepared by the organometallic precursor can offer a promising solution to address the issues related to the halogen elements in the adhesive layer preparation.

Tacn Growth with Pdmat and H-2/Ar Plasma by Plasma Enhanced Atomic Layer Deposition

Growth of cubic-TaN thin films by plasma-enhanced atomic layer deposition

Diffusion Barrier Properties of TaNx Films Prepared by Plasma Enhanced Atomic Layer Deposition from PDMAT with N2 or NH3 Plasma

The physical properties of cubic plasma-enhanced atomic layer deposition TaN films

Deposition of Tetrahedral Hydrogenated Amorphous Carbon Using a Novel Electron Cyclotron Wave Resonance Reactor

Atomic layer deposition of amorphous Ni-Ta-N films for Cu diffusion barrier

ALD TaN from PDMAT in TSV Architectures

Growth kinetics and crystallization behavior of TiO2 films prepared by plasma enhanced atomic layer deposition

Deposition of TiN and TaN by Remote Plasma ALD for Cu and Li Diffusion Barrier Applications

Growth of nanoscale Ta-Al-N diffusion barriers

The Study of Pd Film Layer Deposited on Surface of Pure Titanium by Arc Ion Plating Technology

TiN/AlN Nano Multilayers Film Fabricated by Plasma Enhanced Atomic Layer Deposition

Enhanced Discharge and Microstructure of the Ta-C Coatings by Electromagnetically Enhanced Cathodic Arc at Argon Atmosphere

Plasma‐Enhanced Atomic Layer Deposition of Amorphous Tantalum Thin Films for Copper Interconnects Using an Organometallic Precursor

Structure, mechanical and tribological properties, and oxidation resistance of TaC/a-C:H films deposited by high power impulse magnetron sputtering

The effect of NH3 plasma pulse time on atomic layer-deposited TiN films using tetrakis-(dimethylamino) titanium as a metal precursor

TiN/TiCN Multilayer Films Modified by Argon Plasma Treatment

Design and Fabrication of Ultrathin and Highly Thermal-Stable Α-Ta/graded Ta(N)/TaN Multilayer As Diffusion Barrier for Cu Interconnects

Sn/Pd Catalyzation and Electroless Cu Deposition on TaN Diffusion Barrier Layers

Enhancement of Discharge and Deposition Rate by Imposed Pulse Current During the Cathodic Arc Deposition of Ta-C Films

Atomic Layer Deposition of Tio2 from Tetrakis-Dimethyl-Amido Titanium or Ti Isopropoxide Precursors and H2o